Mazda 6 2012 2.0 150 Hp
Mazda 6 2012 2.0 petrol description
Sedan Mazda 6 2012 2.0 150 Hp has been produced from January, 2012 to January, 2015. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 150 horsepower on 6000 rpm and torque 210 Nm (Newton metres) on 4000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system without turbocharger. Engine versions compliant with Euro 4 and Euro 5 emission standards available. Average engine life expectancy (mileage before serious repairs are needed) is from 270 000 to 450 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The ...
This Mazda 6 2.0 engine oil type is 0W-20 and oil capacity is 4.2 litres.
Mazda 6 2012 2.0 150 Hp has front wheel drive (FWD) and manual gearbox with 6 gears.
Mazda 6 2012 2.0 150 Hp accelerates to speed 100 kilometres per hour in 9.7 seconds. The maximum speed of this car is 208 km/h.
The fuel consumption of this Mazda 6 2012 2.0 150 Hp in combined mode (combining urban and highway driving) is 6 litres per 100km (16.7 km/l), city fuel economy - 8.1 l/100km, fuel consumption on highway - 4.8 l/100km. Fuel tank capacity is 62 litres or 16.38 gallons, which gives a mileage up to 1020 kilometers without refueling in urban cycle and even up to 1280 kilometers on highway.
Mazda 6 safety
During safety testing Mazda 6 has obtained 5 stars from five, which means very high safety level.
Adults (driver and passenger) safety of Mazda 6 is evaluated with outstanding rate 92 from 100, children safety: good mark - 77 from 100, for pedestrian protection Mazda 6 got 66 points from 100.
Mazda 6 safety equipment has been rated as very good - 81 percents from 100.
Mazda 6 2012 2.0 150 Hp technical data
| Model: | Mazda 6 2.0 150 Hp | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2012. January ... 2015. January | ||
| Engine: | 1998 cm3 Petrol, 4 cylinders | CO2 emissions: | 129 g/km |
| Power: | 150 HP ON 6000 RPM | Torque: | 210 NM ON 4000 RPM |
| Gearbox: | Manual gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Maximum speed: | 208 km/h | Acceleration 0-100 km/h: | 9.7 seconds |
| Fuel consumption (l/100km): | 6.0 (combined) 8.1 (urban) 4.8 (highway) | ||
| Fuel tank capacity: | 62 litres (16.4 gallons) | ||
| Car dimensions: | 4.87m (length) 1.84m (width) 1.45m (height) | ||
| Turning diameter: | 10.2 meters | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 483 litres | ||
Mazda 6 2012 2.0 150 Hp engine PE-VPS
Engine reliability and common problems:
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The use of substandard fuel often leads to the failure of expensive ignition coils, resulting in significant repair costs. Additionally, due to wear on the plastic tensioner pulley, the serpentine belt frequently breaks.The engine is also prone to increased oil consumption, which can be observed even from the very first kilometers. To avoid these issues, it is crucial to use high-quality fuel and perform regular maintenance.
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1997 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 83.5 mm |
| Stroke length (piston move) | 91.2 mm |
| Compression ratio | 13 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Mazda 6 2012 2.0 150 Hp oil type | 0W-20 |
| Oil capacity | 4.2 litres (4.4 quarts) |
| Power | 150 - 165 HP ON 6000 RPM |
| Torque | 200 - 210 NM ON 4000 RPM |
| Start of production (year) | 2012 |
| Duration of production | 13 years |
| Engine also used on | Mazda 3 Mazda MX-5 Mazda CX-5 Mazda CX-3 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
Most often compared to
All Mazda 6 sedan [2012 - 2015] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
| Mazda 6 2012 2.0 150 Hp Jan 2012 — Jan 2015 | 2.0 Petrol | 150 HP | 6.0 l/100km | Manual (6) |
| Mazda 6 2012 2.0 150 Hp Automatic Jan 2012 — Jan 2015 | 2.0 Petrol | 150 HP | 6.1 l/100km | Automatic (6) |
|
Mazda 6 2012 2.0 165 Hp
Jan 2012 — Jan 2015 Most fuel efficient petrol version by real consumption |
2.0 Petrol | 165 HP | 5.9 l/100km | Manual (6) |
| Mazda 6 2012 2.0 165 Hp Automatic Jan 2012 — Jan 2015 | 2.0 Petrol | 165 HP | 6.0 l/100km | Automatic (6) |
|
Mazda 6 2012 2.2 Automatic
Jan 2012 — Jan 2015 Most fuel efficient petrol version |
2.2 Petrol | 150 HP | 4.8 l/100km | Automatic (6) |
|
Mazda 6 2012 2.2
Jan 2012 — Jan 2015 Most fuel efficient diesel version |
2.2 Diesel | 150 HP | 3.9 l/100km | Manual (6) |
| Mazda 6 2012 2.2 SKYACTIV-D 150 Hp Automatic | 2.2 Diesel | 150 HP | 4.8 l/100km | Automatic (6) |
|
Mazda 6 2012 2.2 SKYACTIV-D 175 Hp
Most dynamic version - 100 km/h in 7.8 seconds |
2.2 Diesel | 175 HP | 4.5 l/100km | Manual (6) |
|
Mazda 6 2012 2.2 SKYACTIV-D 175 Hp Automatic
Most powerfull diesel version (175 HP) |
2.2 Diesel | 175 HP | 4.8 l/100km | Automatic (6) |
|
Mazda 6 2012 2.5
Jan 2012 — Jan 2015 Most dynamic version - 100 km/h in 7.8 seconds |
2.5 Petrol | 192 HP | 6.3 l/100km | Automatic (6) |