Mazda 6 2015 2.0
Mazda 6 2015 2.0 petrol description
Sedan Mazda 6 2015 2.0 has been produced from January, 2015 to January, 2018. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 150 horsepower on 6000 rpm and torque 210 Nm (Newton metres) on 4000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). Engine versions compliant with Euro 4 and Euro 5 emission standards available. Engine lifespan (mileage before major repairs or overhaul) can last from 270 up to 450 thousand kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The ...
This Mazda 6 2.0 engine oil type is 0W-20 and oil capacity is 4.2 litres.
Mazda 6 2015 2.0 has front wheel drive (FWD) and manual gearbox with 6 gears.
Mazda 6 2015 2.0 accelerates to speed 100 kilometres per hour in 9.5 seconds. The maximum speed of this car is 208 km/h.
Mazda 6 2015 2.0 fuel consumption is 6 litres per 100km in combined city/highway mode (16.7 km/l), fuel consumption in city - 8.1 l/100km, highway fuel economy - 4.8 l/100km. Fuel tank capacity is 62 litres or 16.38 gallons, which gives a mileage up to 1020 kilometers without refueling in urban cycle and even up to 1280 kilometers on highway.
Mazda 6 2015 2.0 technical data
| Model: | Mazda 6 2.0 | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2015. January ... 2018. January | ||
| Engine: | 1998 cm3 Petrol, 4 cylinders | CO2 emissions: | 129 g/km |
| Power: | 150 HP ON 6000 RPM | Torque: | 210 NM ON 4000 RPM |
| Gearbox: | Manual gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | 208 km/h | Acceleration 0-100 km/h: | 9.5 seconds |
| Fuel consumption (l/100km): | 6.0 (combined) 8.1 (urban) 4.8 (highway) | ||
| Fuel tank capacity: | 62 litres (16.4 gallons) | ||
| Car dimensions: | 4.87m (length) 1.84m (width) 1.45m (height) | ||
| Turning diameter: | 11.2 meters | ||
| Ground clearance: | 165 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 438 litres | ||
| Gross weight: | 1935 kg | ||
Mazda 6 2015 2.0 engine PE-VPS
Engine reliability and common problems:
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The use of substandard fuel often leads to the failure of expensive ignition coils, resulting in significant repair costs. Additionally, due to wear on the plastic tensioner pulley, the serpentine belt frequently breaks.The engine is also prone to increased oil consumption, which can be observed even from the very first kilometers. To avoid these issues, it is crucial to use high-quality fuel and perform regular maintenance.
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1997 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 83.5 mm |
| Stroke length (piston move) | 91.2 mm |
| Compression ratio | 13 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Mazda 6 2015 2.0 oil type | 0W-20 |
| Oil capacity | 4.2 litres (4.4 quarts) |
| Power | 150 - 165 HP ON 6000 RPM |
| Torque | 200 - 210 NM ON 4000 RPM |
| Start of production (year) | 2012 |
| Duration of production | 13 years |
| Engine also used on | Mazda 3 Mazda MX-5 Mazda CX-5 Mazda CX-3 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
Most often compared to
All Mazda 6 sedan [2015 - 2018] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Mazda 6 2015 2.0
Most fuel efficient petrol version |
2.0 Petrol | 150 HP | 6.0 l/100km | Manual (6) |
| Mazda 6 2015 2.0 Automatic | 2.0 Petrol | 150 HP | 6.1 l/100km | Automatic (6) |
|
MAZDA 6 2015 / Atenza Sedan 2.0L SKYACTIV-G
Most fuel efficient petrol version |
2.0 Petrol | 165 HP | 6.0 l/100km | Manual (6) |
|
MAZDA 6 2015 / Atenza Sedan 2.0L SKYACTIV-G Automatic
Most fuel efficient petrol version |
2.0 Petrol | 165 HP | 6.0 l/100km | Automatic (6) |
|
MAZDA 6 2015 / Atenza Sedan 2.2L SKYACTIV-D 150 Hp
Most fuel efficient diesel version |
2.2 Diesel | 150 HP | 3.9 l/100km | Manual (6) |
| MAZDA 6 2015 / Atenza Sedan 2.2L SKYACTIV-D 150 Hp Automatic | 2.2 Diesel | 150 HP | 4.8 l/100km | Automatic (6) |
|
MAZDA 6 2015 / Atenza Sedan 2.2L SKYACTIV-D 175 Hp
Most powerfull diesel version (175 HP) |
2.2 Diesel | 175 HP | 4.5 l/100km | Manual (6) |
|
MAZDA 6 2015 / Atenza Sedan 2.2L SKYACTIV-D 175 Hp Automatic
Most powerfull diesel version (175 HP) |
2.2 Diesel | 175 HP | 4.8 l/100km | Automatic (6) |
|
Mazda 6 2015 2.5
Most dynamic version - 100 km/h in 7.8 seconds |
2.5 Petrol | 192 HP | 6.5 l/100km | Automatic (6) |