Peugeot 2008 2013 1.2 e-HTP
Peugeot 2008 2013 1.2 petrol description
Crossover / SUV Peugeot 2008 2013 1.2 e-HTP has been produced from January, 2013 to December, 2015. It has three-cylinder petrol engine with displacement of 1.2 litres, which produces power of 110 horsepower on 6250 rpm and torque 205 Nm (Newton metres) on 1750 revolutions per minute.
This 3-cylinder 12-valve engine camshaft is driven by belt (What is an engine chain and belt? ). Engine has fuel injection system and Garrett NGT1341LSZ turbine. Engine versions compliant with Euro 5 and Euro 6 emission standards available. Average engine life expectancy (mileage before serious repairs are needed) is from 240 000 to 400 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
Because the timing belt is placed in oil, it doesn't last the intended 180,000 kilometers, and ...
This Peugeot 2008 1.2 engine oil type is 0W-30 and oil capacity is 3.5 litres.
Peugeot 2008 2013 1.2 e-HTP has front wheel drive (FWD) and manual gearbox with 5 gears.
Peugeot 2008 2013 1.2 e-HTP accelerates to speed 100 kilometres per hour in 9.9 seconds. The maximum speed of this car is 188 km/h.
The fuel consumption of this Peugeot 2008 2013 1.2 e-HTP in combined mode (combining urban and highway driving) is 4.7 litres per 100km (21.3 km/l), fuel consumption in city - 5.8 l/100km, highway fuel economy - 4 l/100km. Fuel tank capacity is 50 litres or 13.21 gallons, which gives a mileage up to 1060 kilometers without refueling in urban cycle and even up to 1240 kilometers on highway.
Peugeot 2008 safety
During safety testing Peugeot 2008 has obtained 4 stars from five, which means good safety level.
Adults (driver and passenger) safety of Peugeot 2008 is evaluated with outstanding rate 91 from 100, children safety: very good mark - 84 from 100, for pedestrian protection Peugeot 2008 got 62 points from 100.
Peugeot 2008 safety equipment has been rated as average - 68 percents from 100.
Peugeot 2008 2013 1.2 e-HTP technical data
| Model: | Peugeot 2008 1.2 e-HTP | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2013. January ... 2015. December | ||
| Engine: | 1199 cm3 Petrol, 3 cylinders | CO2 emissions: | no data |
| Power: | 110 HP ON 6250 RPM | Torque: | 205 NM ON 1750 RPM |
| Gearbox: | Manual gearbox (5 gears) | Drive type: | Front wheel drive (FWD) |
| Maximum speed: | 188 km/h | Acceleration 0-100 km/h: | 9.9 seconds |
| Fuel consumption (l/100km): | 4.7 (combined) 5.8 (urban) 4.0 (highway) | ||
| Fuel tank capacity: | 50 litres (13.2 gallons) | ||
| Car dimensions: | 4.16m (length) 1.74m (width) 1.56m (height) | ||
| Turning diameter: | 11.2 meters | ||
| Ground clearance: | 165 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 350 litres | ||
| Trunk max capacity: | 1172 litres (with rear seats folded down) | ||
| Gross weight: | 1656 kg | ||
Peugeot 2008 2013 1.2 e-HTP engine EB2DT
Engine reliability and common problems:
Because the timing belt is placed in oil, it doesn't last the intended 180,000 kilometers, and its wear products clog the oilways. First years of engines have been recalled due to axial play in the crankshaft.Overall, this engine can last around 240,000 to 400,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
| Engine displacement | 1199 cm3 |
|---|---|
| Number of cylinders | 3 |
| Bore (cylinder diameter) | 75 mm |
| Stroke length (piston move) | 90.5 mm |
| Compression ratio | 10.5 : 1 |
| Camshaft drive | Timing belt Timing belt engines are generally quieter and less vibrating than chain engines, but belt usually needs to be replaced more often and the risk of breakage is higher. However, the timing belt change interval for a particular engine is long enough to be comparable to the life of some engine chains. More service info |
| Timing belt change interval | 180,000 km |
| Fuel system | Injection |
| Peugeot 2008 2013 1.2 e-HTP oil type | 0W-30 |
| Oil capacity | 3.5 litres (3.7 quarts) More service info |
| Power | 110 HP ON 6250 RPM |
| Torque | 205 NM ON 1750 RPM |
| Start of production (year) | 2014 |
| Duration of production | 11 years |
| Engine also used on | Peugeot 308 Citroen C3 Opel Combo Citroen C4 and 7 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Peugeot 2008 crossover [2013 - 2016] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Peugeot 2008 1.2
Most fuel efficient petrol version by real consumption |
1.2 Petrol | 82 HP | 4.9 l/100km | Manual (5) |
| Peugeot 2008 2013 1.2 e-VTi Jan 2013 — Dec 2015 | 1.2 Petrol | 82 HP | 4.8 l/100km | Automatic (5) |
|
Peugeot 2008 2013 1.2 e-HTP
Jan 2013 — Dec 2015 Most fuel efficient petrol version |
1.2 Petrol | 110 HP | 4.7 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 VTi
Jan 2013 — Dec 2015 Most dynamic version - 100 km/h in 9.5 seconds |
1.6 Petrol | 120 HP | 5.9 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 VTi
Most powerfull petrol version (120 HP) |
1.6 Petrol | 120 HP | 6.5 l/100km | Automatic (4) |
|
Peugeot 2008 2013 1.6 e-HDi
Most fuel efficient diesel version by real consumption |
1.6 Diesel | 92 HP | 4.0 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 e-HDi
Most fuel efficient diesel version |
1.6 Diesel | 92 HP | 3.8 l/100km | Automatic (6) |
|
Peugeot 2008 2013 1.6 e-HDi
Most powerfull diesel version (115 HP) |
1.6 Diesel | 115 HP | 4.0 l/100km | Automatic |