Mazda CX-5 2012 2.0i 2WD Automatic
Mazda CX-5 2012 2.0 petrol description
Crossover / SUV Mazda CX-5 2012 2.0i 2WD Automatic has been produced from January, 2012 to January, 2015. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 150 horsepower on 6000 rpm and torque 210 Nm (Newton metres) on 4000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, it has no turbine. Engine versions compliant with Euro 4 and Euro 5 emission standards available. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 270 000 and 450 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The ...
This Mazda CX-5 2.0 engine oil type is 0W-20 and oil capacity is 4.2 litres.
Mazda CX-5 2012 2.0i 2WD Automatic has front wheel drive (FWD) and automatic gearbox with 6 gears.
Mazda CX-5 2012 2.0i 2WD Automatic accelerates to speed 100 kilometres per hour in 9.3 seconds. The maximum speed of this car is 191 km/h.
In combined cycle (city and motorway), the Mazda CX-5 2012 2.0i 2WD Automatic fuel consumption is 6.3 litres per 100km (15.9 km/l), city fuel economy - 7.9 l/100km, fuel consumption on highway - 5.4 l/100km. Fuel tank capacity is 56 litres or 14.8 gallons, which gives a mileage up to 880 kilometers without refueling in urban cycle and even up to 1020 kilometers on highway.
Mazda CX-5 safety
During safety testing Mazda CX-5 has obtained 5 stars from five, which means very high safety level.
Adults (driver and passenger) safety of Mazda CX-5 is evaluated with outstanding rate 94 from 100, children safety: very good mark - 87 from 100, for pedestrian protection Mazda CX-5 got 64 points from 100.
Mazda CX-5 safety equipment has been rated as very good - 86 percents from 100.
- Mazda CX-5 2012 2.0i 2WD MT manufacturer's fuel consumption is similar - 6.2 litres per 100 km
- Mazda CX-5 2012 2.0i 4WD AT is more sluggish, reaching 100 km/h 0.5 seconds later (in 9.8 seconds), but manufacturer's fuel consumption is higher by 0.4 litres per 100 km or 6 % - 6.7 litres per 100 km
Mazda CX-5 2012 2.0i 2WD Automatic technical data
| Model: | Mazda CX-5 2.0i 2WD Automatic | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2012. January ... 2015. January | ||
| Engine: | 1997 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 150 HP ON 6000 RPM | Torque: | 210 NM ON 4000 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | 191 km/h | Acceleration 0-100 km/h: | 9.3 seconds |
| Fuel consumption (l/100km): | 6.3 (combined) 7.9 (urban) 5.4 (highway) | ||
| Fuel tank capacity: | 56 litres (14.8 gallons) | ||
| Car dimensions: | 4.54m (length) 1.84m (width) 1.67m (height) | ||
| Turning diameter: | 11.2 meters | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 463 litres | ||
| Trunk max capacity: | 1620 litres (with rear seats folded down) | ||
Mazda CX-5 2012 2.0i 2WD Automatic engine PE-VPS
Engine reliability and common problems:
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The use of substandard fuel often leads to the failure of expensive ignition coils, resulting in significant repair costs. Additionally, due to wear on the plastic tensioner pulley, the serpentine belt frequently breaks.The engine is also prone to increased oil consumption, which can be observed even from the very first kilometers. To avoid these issues, it is crucial to use high-quality fuel and perform regular maintenance.
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1997 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 83.5 mm |
| Stroke length (piston move) | 91.2 mm |
| Compression ratio | 13 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Mazda CX-5 2012 2.0i 2WD Automatic oil type | 0W-20 |
| Oil capacity | 4.2 litres (4.4 quarts) |
| Power | 150 - 165 HP ON 6000 RPM |
| Torque | 200 - 210 NM ON 4000 RPM |
| Start of production (year) | 2012 |
| Duration of production | 13 years |
| Engine also used on | Mazda 6 Mazda 3 Mazda MX-5 Mazda CX-3 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
Most often compared to
All Mazda CX-5 crossover [2012 - 2015] modifications
| Modification | Engine | Power | Consumption | Gearbox | Drive type |
|---|---|---|---|---|---|
|
Mazda CX-5 2012 2.0i 2WD
Most fuel efficient petrol version |
2.0 Petrol | 150 HP | 6.2 l/100km | Manual (5) | Front wheel |
| Mazda CX-5 2012 2.0i 2WD Automatic | 2.0 Petrol | 150 HP | 6.3 l/100km | Automatic (6) | Front wheel |
| Mazda CX-5 2012 2.0i 4WD | 2.0 Petrol | 150 HP | 6.7 l/100km | Automatic (6) | All wheel |
|
Mazda CX-5 2012 SkyActiv-D 2.2
Jul 2012 — Jan 2015 Most fuel efficient diesel version |
2.2 Diesel | 150 HP | 4.6 l/100km | Manual (6) | Front wheel |
| Mazda CX-5 2012 SkyActiv-D 2.2 Automatic Jul 2012 — Jan 2015 | 2.2 Diesel | 150 HP | 5.3 l/100km | Automatic (6) | Front wheel |
| Mazda CX-5 2012 SkyActiv-D 2.2 4WD Jul 2012 — Jan 2015 | 2.2 Diesel | 175 HP | 5.5 l/100km | Automatic (6) | All wheel |
|
Mazda CX-5 2013 2.5 SKYACTIV-G 4WD
Jan 2013 — Jan 2015 Most dynamic version - 100 km/h in 7.9 seconds |
2.5 Diesel | 192 HP | 7.3 l/100km | Automatic (6) | Front wheel |