Seat Toledo 2013 1.6 TDI
Seat Toledo 2013 1.6 diesel description
Hatchback Seat Toledo 2013 1.6 TDI has been produced from 2013 to 2015. It has four-cylinder diesel engine with displacement of 1.6 litres, which produces power of 90 horsepower on 4200 rpm and torque 230 Nm (Newton metres) on 1500 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by belt (What is an engine chain and belt? ). Engine has Common Rail fuel system and VGT turbine. The engine meets the Euro 5 emissions standard. Average engine life expectancy (mileage before serious repairs are needed) is from 220 000 to 370 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
The 1.6 TDI turbo diesel engine is generally reliable, which is especially reassuring given its frequent use in commercial vehicles. Even under heavy use, it can exceed 500,000 km, ...
This Seat Toledo 1.6 engine oil type is 5W-30 and oil capacity is 4.3 litres.
Seat Toledo 2013 1.6 TDI has front wheel drive (FWD) and automatic gearbox with 7 gears.
Seat Toledo 2013 1.6 TDI accelerates to speed 100 kilometres per hour in 12.2 seconds. The maximum speed of this car is 184 km/h.
Seat Toledo 2013 1.6 TDI technical data
| Model: | Seat Toledo 1.6 TDI | ||
|---|---|---|---|
| Body style: | Hatchback | ||
| Production period: | 2013. January ... 2015. December | ||
| Engine: | 1598 cm3 Diesel, 4 cylinders | CO2 emissions: | no data |
| Power: | 90 HP ON 4200 RPM | Torque: | 230 NM ON 1500 RPM |
| Gearbox: | Automatic gearbox (7 gears) | Drive type: | Front wheel drive (FWD) |
| Maximum speed: | 184 km/h | Acceleration 0-100 km/h: | 12.2 seconds |
| Fuel consumption (l/100km): | no data | ||
| Fuel tank capacity: | 55 litres (14.5 gallons) | ||
| Car dimensions: | 4.48m (length) 1.71m (width) 1.46m (height) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 550 litres | ||
Seat Toledo 2013 1.6 TDI engine CAYB
Engine reliability and common problems:
The 1.6 TDI turbo diesel engine is generally reliable, which is especially reassuring given its frequent use in commercial vehicles. Even under heavy use, it can exceed 500,000 km, provided that maintenance is performed regularly and without cost-cutting. Using high-quality engine oil with the correct specifications is essential. It's also important to monitor ECU software updates and install them when available to ensure optimal engine performance.The timing belt offers a long service life but requires monitoring, as a failure can lead to bent valves.
Common issues include clogging of the EGR valve and diesel particulate filter. Vehicles used mostly for city driving are particularly prone to these problems, which can lead to loss of power. The regeneration process for the particulate filter depends on the proper functioning of sensors for differential pressure and exhaust gas temperature, which are known to malfunction frequently.
This engine is equipped with a dual-mass flywheel, which typically lasts around 200,000–250,000 km. Its limited lifespan is a known weakness.
Problems can also arise in the Common Rail fuel system, supplied by Continental with piezo injectors. It is highly sensitive to low-quality diesel and infrequent fuel filter replacement. Neglecting this can lead to expensive repairs of the injection system.
Oil leaks from the valve cover are another common issue. These can appear even at relatively low mileage, and replacing the gasket alone often doesn’t help. In most cases, the entire valve cover must be replaced.
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1598 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 79.5 mm |
| Stroke length (piston move) | 80.5 mm |
| Compression ratio | 16.5 : 1 |
| Camshaft drive | Timing belt Timing belt engines are generally quieter and less vibrating than chain engines, but belt usually needs to be replaced more often and the risk of breakage is higher. However, the timing belt change interval for a particular engine is long enough to be comparable to the life of some engine chains. |
| Timing belt change interval | 200,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Common Rail Common rail fuel injection provides more engine power, is quieter, more environmentally friendly and offers better fuel economy, but is more expensive to maintain and repair. |
| Seat Toledo 2013 1.6 TDI oil type | 5W-30 |
| Oil capacity | 4.3 litres (4.5 quarts) |
| Coolant capacity | 8 litres (8.5 quarts) |
| Power | 90 HP ON 4200 RPM |
| Torque | 230 NM ON 1500 RPM |
| Engine manufacturer | Volkswagen (VW) |
| Start of production (year) | 2009 |
| Duration of production | 6 years |
| Engine also used on | Volkswagen Golf Volkswagen Polo Audi A3 Skoda Fabia Skoda Roomster and 3 other models |
All Seat Toledo hatchback [2013 - 2018] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Seat Toledo 2017 1.0 TSI
Jan 2017 — Dec 2018 Most fuel efficient petrol version |
1.0 Petrol | 95 HP | 4.5 l/100km | Manual (5) |
| Seat Toledo 2017 1.0 TSI Jan 2017 — Dec 2018 | 1.0 Petrol | 110 HP | 4.6 l/100km | Automatic (6) |
| Seat Toledo 1.2 Jan 2013 — Dec 2015 | 1.2 Petrol | 75 HP | 5.9 l/100km | Manual (5) |
|
Seat Toledo 2013 1.2 TSI
Jan 2013 — Dec 2015 Most fuel efficient petrol version by real consumption |
1.2 Petrol | 85 HP | 5.1 l/100km | Manual (5) |
| Seat Toledo 2013 1.2 TSI Jan 2013 — Dec 2015 | 1.2 Petrol | 105 HP | 5.0 l/100km | Manual (6) |
|
Seat Toledo 2013 1.4 TSI
Jan 2013 — Dec 2015 Most dynamic version - 100 km/h in 9.5 seconds |
1.4 Petrol | 122 HP | 5.8 l/100km | Automatic (7) |
|
Seat Toledo 2015 1.4 TDI
Jan 2015 — Dec 2016 Most fuel efficient diesel version |
1.4 Diesel | 90 HP | 3.4 l/100km | Manual (5) |
| Seat Toledo 2015 1.4 TDI Jan 2015 — Dec 2016 | 1.4 Diesel | 90 HP | 3.9 l/100km | Automatic (7) |
| Seat Toledo 2013 1.6 TDI Jan 2013 — Dec 2015 | 1.6 Diesel | 90 HP | 4.4 l/100km | Manual (5) |
| Seat Toledo 2013 1.6 TDI Jan 2013 — Dec 2015 | 1.6 Diesel | 90 HP | - | Automatic (7) |
|
Seat Toledo 2013 1.6 TDI
Jan 2013 — Dec 2015 Most powerfull diesel version (105 HP) |
1.6 Diesel | 105 HP | 3.9 l/100km | Manual (5) |