Mazda 6 2010 2.0 Automatic

Mazda 6 2010 2.0 petrol description

Hatchback Mazda 6 2010 2.0 Automatic has been produced from January, 2010 to January, 2012. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 155 horsepower on 6200 rpm and torque 193 Nm (Newton metres) on 4500 revolutions per minute.

This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, it has no turbine. The engine meets the Euro 4 emissions standard. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 270 000 and 450 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs 
The engine tends to idle unevenly. Engine problems may also include the thermostat and cooling  ...  This Mazda 6 2.0 engine oil type is 5W-30 and oil capacity is 4.3 litres.

Mazda 6 2010 2.0 Automatic has front wheel drive (FWD) and automatic gearbox with 5 gears.
Mazda 6 2010 2.0 Automatic accelerates to speed 100 kilometres per hour in 11.1 seconds. The maximum speed of this car is 206 km/h.

In combined cycle (city and motorway), the Mazda 6 2010 2.0 Automatic fuel consumption is 7.6 litres per 100km (13.2 km/l), fuel consumption in city - 10.7 l/100km, highway fuel economy - 5.8 l/100km. Fuel tank capacity is 64 litres or 16.91 gallons, which gives a mileage up to 840 kilometers without refueling in urban cycle and even up to 1100 kilometers on highway.
According to user reviews, this Mazda real everyday fuel consumption is 9 litres per 100 km, which is 18% more than the manufacturer's stated. More - Real Mazda 6 fuel consumption.

With the same engine there is also Mazda 6 version with manual gearbox (Mazda 6 2010 2.0 MT) available, which is more dynamic - it reaches 100 km/h 0.9 seconds faster (in 10.2 seconds), moreover, it is more economic with manufacturer's fuel consumption is lower by 0.5 litres per 100 km or 7 % - 7.1 litres per 100 km, whereas users reported real fuel consumption is lower by 0.8 litres per 100 km or 9 % - 8.2 litres per 100 km.
Mazda 6 2.0 service information and maintenance intervals Oil change intervals, capacities and specifications, service information for filters, spark plugs, belts etc.
Mazda 6 2010

Mazda 6 2010 2.0 Automatic technical data

Model: Mazda 6 2.0 Automatic
Body style: Hatchback
Production period: 2010. January ... 2012. January 
Engine: 1999 cm3 Petrol, 4 cylinders CO2 emissions: 176 g/km
Power: 155 HP ON 6200 RPM Torque: 193 NM ON 4500 RPM
Gearbox: Automatic gearbox (5 gears) Drive type: Front wheel drive (FWD)
Top speed: 206 km/h Acceleration 0-100 km/h: 11.1 seconds
Fuel consumption (l/100km): 7.6 (combined) 10.7 (urban) 5.8 (highway)
Real fuel consumption: 9 l/100km (26.1 MPG) by user reviews from various sources
Fuel tank capacity: 64 litres (16.9 gallons)
Car dimensions: 4.76m (length) 1.80m (width) 1.44m (height)
Turning diameter: 11.8 meters
Ground clearance: 165 mm (approximate, with standard suspension, unladen vehicle)
Seats: 5 seats
Trunk capacity: 510 litres
Trunk max capacity: 1702 litres (with rear seats folded down)
Gross weight: 1980 kg

Mazda 6 2010 2.0 Automatic engine LF-DE

Engine reliability and common problems:

The engine tends to idle unevenly. Engine problems may also include the thermostat and cooling pump. This engine tends to consume more oil at higher mileages.
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
Engine displacement 1999 cm3
Number of cylinders 4
Bore (cylinder diameter) 87.5 mm
Stroke length (piston move) 83.1 mm
Compression ratio 10.8 : 1
Camshaft drive Timing chain

Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more.

More service info
Fuel system Injection
Mazda 6 2010 2.0 Automatic oil type 5W-30
Oil capacity 4.3 litres (4.5 quarts) More service info
Coolant capacity 7.5 litres (7.9 quarts)
Power 140 - 160 HP ON 6200 RPM
Torque 175 - 195 NM ON 4500 RPM
Start of production (year) 2002
Duration of production 13 years
Engine also used on Mazda 3 Mazda MX-5 Mazda 5 Mazda CX-5

Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design.

All Mazda 6 hatchback [2010 - 2012] modifications

Modification Engine Power Consumption Gearbox
Mazda 6 2010 1.8

Most fuel efficient petrol version

1.8 Petrol 120 HP 6.5 l/100km Manual (5)
Mazda 6 2010 2.0 2.0 Petrol 155 HP 7.1 l/100km Manual (6)
Mazda 6 2010 2.0 Automatic

Only version with automatic transmission

2.0 Petrol 155 HP 7.6 l/100km Automatic (5)
Mazda 6 2010 2.2 CiTD 129 Hp

Most fuel efficient diesel version

2.2 Diesel 129 HP 5.2 l/100km Manual (6)
Mazda 6 2010 2.2 CiTD 163 Hp 2.2 Diesel 163 HP 5.4 l/100km Manual (6)
Mazda 6 2010 2.2 CiTD 180 Hp

Most powerfull diesel version (180 HP)

2.2 Diesel 180 HP 5.4 l/100km Manual (6)
Mazda 6 2010 2.5

Most dynamic version - 100 km/h in 8.4 seconds

2.5 Petrol 170 HP 8.0 l/100km Manual (6)
Mazda 6 2010 reviews
Alfa Romeo Audi BMW Chevrolet Chrysler Citroen Dacia Dodge Fiat Ford Honda Hyundai Infiniti Isuzu Jaguar Jeep Kia Lada (VAZ) Land Rover Lexus Mazda Mercedes Mini Mitsubishi Moskvich Nissan Opel Peugeot Porsche Renault Rover SAAB Seat Skoda Smart Subaru Suzuki Toyota Volkswagen Volvo
Contact us: info@auto-abc.lv