MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G
Mazda 6 2018 2.5 petrol description
Sedan MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G is being produced from January, 2018. It has four-cylinder petrol engine with displacement of 2.5 litres, which produces power of 250 horsepower on 5000 rpm - this is the most powerfull Mazda 6 2018 version and torque 420 Nm (Newton metres) on 2000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system and turbine. The engine meets the Euro 6 emissions standard. Engine lifespan (mileage before major repairs or overhaul) can last from 220 up to 370 thousand kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
This Mazda 6 2.5 engine oil type is 5W-30 and oil capacity is 4.8 litres.
MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G has front wheel drive (FWD) and automatic gearbox with 6 gears.
MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G fuel consumption is 9 litres per 100km in combined city/highway mode (11.1 km/l), city fuel economy - 10.2 l/100km, fuel consumption on highway - 7.6 l/100km. Fuel tank capacity is 62 litres or 16.38 gallons, which gives a mileage up to 680 kilometers without refueling in urban cycle and even up to 800 kilometers on highway.
Mazda 6 safety
During safety testing Mazda 6 has obtained 5 stars from five, which means very high safety level.
Adults (driver and passenger) safety of Mazda 6 is evaluated with outstanding rate 95 from 100, children safety: outstanding mark - 91 from 100, for pedestrian protection Mazda 6 got 66 points from 100.
Mazda 6 safety equipment has been rated as good - 73 percents from 100.
MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G technical data
| Model: | MAZDA 6 / Atenza Sedan 2.0L SKYACTIV-G | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2018. January | ||
| Engine: | 2488 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 250 HP ON 5000 RPM | Torque: | 420 NM ON 2000 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 9.0 (combined) 10.2 (urban) 7.6 (highway) | ||
| Fuel tank capacity: | 62 litres (16.4 gallons) | ||
| Car dimensions: | 4.90m (length) 1.84m (width) 1.45m (height) | ||
| Turning diameter: | 12 meters | ||
| Ground clearance: | 165 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 481 litres | ||
MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G engine PY-VPTS
Engine reliability:
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2488 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 89 mm |
| Stroke length (piston move) | 100 mm |
| Compression ratio | 10.5 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-G oil type | 5W-30 |
| Oil capacity | 4.8 litres (5.1 quarts) |
| Power | 227 - 256 HP ON 5000 RPM |
| Torque | 420 - 435 NM ON 2000 RPM |
| Start of production (year) | 2016 |
| Duration of production | 9 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2019 onwards. |
|
| Engine also used on | Mazda CX-9 |
Most often compared to
All Mazda 6 sedan [2018 modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
| Mazda 6 2018 SkyActiv-G 2.0 145 Hp | 2.0 Petrol | 145 HP | 6.2 l/100km | Manual (6) |
| Mazda 6 2018 SkyActiv-G 2.0 145 Hp Automatic | 2.0 Petrol | 145 HP | - | Automatic (6) |
|
Mazda 6 2018 SkyActiv-G 2.0 165 Hp
Most fuel efficient petrol version by real consumption |
2.0 Petrol | 165 HP | 6.5 l/100km | Manual (6) |
| Mazda 6 2018 SkyActiv-G 2.0 165 Hp Automatic | 2.0 Petrol | 165 HP | 6.2 l/100km | Automatic (6) |
|
MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-D 165 Hp
Most fuel efficient diesel version |
2.0 Diesel | 165 HP | 4.4 l/100km | Automatic (6) |
|
MAZDA 6 2018 / Atenza Sedan 2.0L SKYACTIV-D 184 Hp
Most fuel efficient diesel version by real consumption |
2.0 Diesel | 184 HP | 4.7 l/100km | Manual (6) |
|
Mazda 6 2018 SkyActiv-D 2.2 150 Hp
Most fuel efficient diesel version |
2.2 Diesel | 150 HP | 4.4 l/100km | Manual (6) |
|
Mazda 6 2018 SkyActiv-D 2.2 184 Hp
Most fuel efficient diesel version by real consumption |
2.2 Diesel | 184 HP | 4.7 l/100km | Manual (6) |
| Mazda 6 2018 SkyActiv-D 2.2 184 Hp Automatic | 2.2 Diesel | 184 HP | 5.1 l/100km | Automatic (6) |
| MAZDA 6 2018 / Atenza Sedan 2.5L SKYACTIV-G 187 Hp | 2.5 Petrol | 187 HP | 8.7 l/100km | Manual (6) |
| MAZDA 6 2018 / Atenza Sedan 2.5L SKYACTIV-G 187 Hp Automatic | 2.5 Petrol | 187 HP | 8.1 l/100km | Automatic (6) |
|
Mazda 6 2018 SkyActiv-G 2.5
Most dynamic version - 100 km/h in 7.8 seconds |
2.5 Petrol | 194 HP | 4.7 l/100km | Automatic (6) |
| MAZDA 6 2018 / Atenza Sedan 2.5L SKYACTIV-G 227 Hp | 2.5 Petrol | 227 HP | 9.0 l/100km | Automatic (6) |
|
MAZDA 6 2018 2.5 / Atenza Sedan 2.0L SKYACTIV-G
Most powerfull petrol version (250 HP) |
2.5 Petrol | 250 HP | 9.0 l/100km | Automatic (6) |