Peugeot 3008 2020 vs Hyundai Tucson 2018
| Gearbox: | Automatic | Manual | |
|---|---|---|---|
| Engine: | 1.5 Diesel | 1.6 Diesel | |
Performance | |||
| Power: | 131 HP | 136 HP | |
| Torque: | 300 NM | 320 NM | |
| Acceleration 0-100 km/h: | 11.5 seconds | 11.2 seconds | |
|
Hyundai Tucson is a more dynamic driving. Peugeot 3008 engine produces 5 HP less power than Hyundai Tucson, whereas torque is 20 NM less than Hyundai Tucson. Due to the lower power, Peugeot 3008 reaches 100 km/h speed 0.3 seconds later. | |||
Fuel consumption | |||
| Fuel consumption (l/100km): | no data | 5.0 | |
| Fuel tank capacity: | 53 litres | 62 litres | |
| Read the article "Fuel Efficiency: How to Reduce Fuel Consumption" to learn more about fuel economy. | |||
| Ground clearance: | 219 mm (8.6 inches) | 172 mm (6.8 inches) | |
| Because of the higher ground clearance, Peugeot 3008 can perform better on bad roads - it can go over higher obstacles and bumps. At the same time, the higher ground clearance can reduce stability and handling on paved roads, especially at higher speeds. Note, however, that this Peugeot 3008 version does not have 4x4 drive, which is very important in poor road conditions. | |||
Dimensions | |||
| Length: | 4.45 m | 4.48 m | |
| Width: | 1.84 m | 1.85 m | |
| Height: | 1.62 m | 1.65 m | |
| Both cars are similar in size. Peugeot 3008 is 3 cm shorter than the Hyundai Tucson, width is practically the same , while the height of Peugeot 3008 is 3 cm lower. | |||
| Trunk capacity: | 520 litres | 513 litres | |
| Trunk max capacity: with rear seats folded down, if possible |
1482 litres | 1503 litres | |
| Turning diameter: | 10.7 meters | no data | |
| Gross weight: | 2`000 kg | 2`120 kg | |
| Net weight: | 1`429 kg | 1`507 kg | |
| Load capacity: | 571 kg | 613 kg | |
| Safety: | no data | no data | |
| Quality: | no data | below average | |
| Average price (€): | 20 800 | 15 400 | |
| Pros and Cons: |
Peugeot 3008 has
|
Hyundai Tucson has
| |