Chrysler 300C 2015 3.6 petrol description
Sedan Chrysler 300C 2015 3.6 296 Hp has been produced from 2015 to 2023. It has six-cylinder petrol engine with displacement of 3.6 litres, which produces power of 296 horsepower on 6350 rpm and torque 353 Nm (Newton metres) on 4800 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, it has no turbine. The engine meets the Euro 4 emissions standard. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 290 000 and 490 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their ...
This Chrysler 300C 3.6 engine oil type is 5W-30 and oil capacity is 5.6 litres.
Chrysler 300C 2015 3.6 296 Hp has classical rear wheel drive (RWD) and automatic gearbox with 8 gears.
In combined cycle (city and motorway), the Chrysler 300C 2015 3.6 296 Hp fuel consumption is 10.2 litres per 100km (9.8 km/l) - this is one of most fuel efficient Chrysler 300C 2015 - 2023 versions, city fuel economy - 12.4 l/100km, fuel consumption on highway - 7.6 l/100km. Fuel tank capacity is 72 litres or 19.02 gallons, which gives a mileage up to 700 kilometers without refueling in urban cycle and even up to 940 kilometers on highway.
Chrysler 300C 2015 3.6 296 Hp technical data
| Model: | Chrysler 300C 3.6 296 Hp | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2015. January ... 2023. December | ||
| Engine: | 3604 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
| Power: | 296 HP ON 6350 RPM | Torque: | 353 NM ON 4800 RPM |
| Gearbox: | Automatic gearbox (8 gears) | Drive type: | Rear wheel drive (RWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 10.2 (combined) 12.4 (urban) 7.6 (highway) | ||
| Fuel tank capacity: | 72 litres (19 gallons) | ||
| Car dimensions: | 5.04m (length) 1.90m (width) 1.48m (height) | ||
| Turning diameter: | 11.4 meters | ||
| Ground clearance: | 120 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Net weight: | 1828 kg | Gross weight: | no data |
Chrysler 300C 2015 3.6 296 Hp engine ERB
Engine reliability and common problems:
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their limited lifespan. Another common issue is the clogging of oil channels with wear particles.After 100,000–150,000 km, the engine oil cooler, which also houses the oil filter, often begins to leak. It’s recommended to replace the entire unit with a genuine part, as non-original replacements are unreliable. Most of the time, oil leaks into the engine's V-section, in some cases, it mixes with coolant, causing serious complications.
The crankshaft seal is not reliable, and the thermostat housing often cracks. Additionally, for the first 20–30 seconds after engine start, particularly in near-zero or sub-zero temperatures, the accessory belt roller tends to make noticeable noise.
Overall, this engine can last around 290,000 to 490,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 3604 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 96 mm |
| Stroke length (piston move) | 83 mm |
| Compression ratio | 10.2 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Chrysler 300C 2015 3.6 296 Hp oil type | 5W-30 |
| Oil capacity | 5.6 litres (5.9 quarts) |
| Coolant capacity | 9.5 litres (10 quarts) |
| Power | 280 - 310 HP ON 6350 RPM |
| Torque | 345 - 365 NM ON 4800 RPM |
| Start of production (year) | 2010 |
| Duration of production | 16 years |
| Engine also used on | Jeep Grand Cherokee Chrysler Grand Voyager Chrysler Town & Country and 7 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Chrysler 300C sedan [2015 - 2023] modifications
| Modification | Engine | Power | Consumption | Drive type |
|---|---|---|---|---|
|
Chrysler 300C 2015 3.6 286 Hp
Jan 2015 — Dec 2021 Most fuel efficient version |
3.6 Petrol | 286 HP | 9.7 l/100km | Rear wheel |
| Chrysler 300C 2015 3.6 296 Hp | 3.6 Petrol | 296 HP | 10.2 l/100km | Rear wheel |
| Chrysler 300C 2015 3.6 296 Hp 4x4 | 3.6 Petrol | 296 HP | 11.2 l/100km | All wheel |
| Chrysler 300C 2015 S 3.6 | 3.6 Petrol | 305 HP | 10.2 l/100km | Rear wheel |
| Chrysler 300C 2015 S 3.6 4x4 | 3.6 Petrol | 305 HP | 11.2 l/100km | All wheel |
| Chrysler 300C 2015 5.7 | 5.7 Petrol | 367 HP | 12.4 l/100km | Rear wheel |
|
Chrysler 300C 2015 SRT 6.4
Jan 2015 — Dec 2021 Most powerfull version (476 HP) |
6.4 Petrol | 476 HP | 13.0 l/100km | Rear wheel |