BMW 128ti (F40)
BMW 1 series 2019 2.0 petrol description
Hatchback BMW 128ti is being produced from January, 2019. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 265 horsepower on 4750 rpm and torque 400 Nm (Newton metres) on 1750 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system and MHI TD04LR6W turbine. The engine meets the Euro 6 emissions standard. Average engine life expectancy (mileage before serious repairs are needed) is from 200 000 to 340 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
Compared to their predecessors, B48 engines are more robust and less prone to major failures. They are well-suited for chip tuning, which can noticeably enhance ...
This BMW 1 series 2.0 engine oil type is 0W-30, 5W-30, 0W-20 and oil capacity is 5.3 litres.
BMW 128ti has front wheel drive (FWD) and automatic gearbox with 8 gears.
BMW 128ti accelerates to speed 100 kilometres per hour in 6.1 seconds. The maximum speed of this car is 250 km/h.
The fuel consumption of this version of BMW 128ti reported by owners in daily driving mode is 8.6 litres per 100km.
BMW 1 series safety
During safety testing BMW 1 series has obtained 5 stars from five, which means very high safety level.
Adults (driver and passenger) safety of BMW 1 series is evaluated with very good rate 83 from 100, children safety: very good mark - 87 from 100, for pedestrian protection BMW 1 series got 76 points from 100.
BMW 1 series safety equipment has been rated as good - 72 percents from 100.
BMW 128ti technical data
| Model: | BMW 128ti | ||
|---|---|---|---|
| Body style: | Hatchback | ||
| Production period: | 2019. January | ||
| Engine: | 1998 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 265 HP ON 4750 RPM | Torque: | 400 NM ON 1750 RPM |
| Gearbox: | Automatic gearbox (8 gears) | Drive type: | Front wheel drive (FWD) |
| Maximum speed: | 250 km/h | Acceleration 0-100 km/h: | 6.1 seconds |
| Fuel consumption: | 8.6 l/100km (27.4 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 50 litres (13.2 gallons) | ||
| Car dimensions: | 4.32m (length) 1.80m (width) 1.43m (height) | ||
| Turning diameter: | 11.4 meters | ||
| Ground clearance: | 153 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 380 litres | ||
| Trunk max capacity: | 1200 litres (with rear seats folded down) | ||
| Gross weight: | 2000 kg | ||
BMW 128ti engine B48B20O1
Engine reliability and common problems:
Compared to their predecessors, B48 engines are more robust and less prone to major failures. They are well-suited for chip tuning, which can noticeably enhance performance and responsiveness without compromising reliability.Oil consumption, while significantly improved over earlier engines, may still appear closer to 100,000 km, often due to hardened valve stem seals. Another common issue is unstable idle or fault codes related to a lean mixture, typically caused by a faulty fuel tank ventilation valve — a relatively inexpensive part.
The cooling system is a known weak point. Coolant leaks may result from seal failures, cracks, thermostat or pump malfunctions, or general contamination. Symptoms include engine overheating, white smoke from the exhaust, poor coolant quality, visible leaks, warnings on the dashboard, and elevated temperature readings.
These engines are sensitive to fuel quality and oil change intervals. Cutting corners on maintenance often leads to costly repairs or even engine replacement.
At higher mileage, weaknesses may also include chain tensioners, the VANOS and Valvetronic systems, high-pressure fuel pumps, throttle actuators, and the turbocharger.
Overall, the B48 is a reliable and practical engine without inherent flaws. The mentioned issues tend to appear only under certain conditions and are not universal across all units.
Overall, this engine can last around 200,000 to 340,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1998 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 82 mm |
| Stroke length (piston move) | 94.6 mm |
| Compression ratio | 10.2 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Fuel system | Injection |
| BMW 128ti oil type | 0W-30, 5W-30, 0W-20 |
| Oil capacity | 5.3 litres (5.6 quarts) More service info |
| Coolant capacity | 10.8 litres (11.4 quarts) |
| Power | 258 - 265 HP ON 4750 RPM |
| Torque | 400 NM ON 1750 RPM |
| Start of production (year) | 2014 |
| Duration of production | 11 years |
| Engine also used on | BMW 3 sērija BMW 6 sērija BMW Z4 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All BMW 1 series hatchback [2019 modifications
| Modification | Engine | Power | Consumption | Gearbox | Drive type |
|---|---|---|---|---|---|
| BMW 116i | 1.5 Petrol | 109 HP | - | Manual (6) | Front wheel |
| BMW 116i | 1.5 Petrol | 109 HP | - | Automatic (7) | Front wheel |
|
BMW 118i
Jan 2019 — Dec 2020 Most fuel efficient petrol version |
1.5 Petrol | 140 HP | 5.7 l/100km | Manual (6) | Front wheel |
|
BMW 118i
Jan 2019 — Dec 2020 Most fuel efficient petrol version |
1.5 Petrol | 140 HP | 5.7 l/100km | Automatic (7) | Front wheel |
|
BMW 116d
Most fuel efficient diesel version |
1.5 Diesel | 116 HP | 4.2 l/100km | Manual (6) | Front wheel |
|
BMW 116d
Most fuel efficient diesel version |
1.5 Diesel | 116 HP | 4.2 l/100km | Automatic (7) | Front wheel |
| BMW 120i | 2.0 Petrol | 178 HP | - | Automatic (7) | Front wheel |
| BMW 128ti | 2.0 Petrol | 265 HP | - | Automatic (8) | Front wheel |
|
BMW M135i xDrive 4x4
Most dynamic version - 100 km/h in 4.8 seconds |
2.0 Petrol | 306 HP | 7.1 l/100km | Automatic (8) | All wheel |
| BMW 118d | 2.0 Diesel | 150 HP | 4.4 l/100km | Manual (6) | Front wheel |
| BMW 118d | 2.0 Diesel | 150 HP | 4.4 l/100km | Automatic (8) | Front wheel |
|
BMW 120d
Most powerfull diesel version (190 HP) |
2.0 Diesel | 190 HP | - | Automatic (8) | Front wheel |
|
BMW 120d xDrive 4x4
Most powerfull diesel version (190 HP) |
2.0 Diesel | 190 HP | 4.7 l/100km | Automatic (8) | All wheel |