Toyota Sienna 2010 3.5 petrol description
Minivan / MPV Toyota Sienna 2010 3.5i V6 has been produced from January, 2010 to December, 2017. It has six-cylinder petrol engine with displacement of 3.5 litres, which produces power of 266 horsepower on 6200 rpm - this is the most powerfull Toyota Sienna 2010 - 2017 version and torque 392 Nm (Newton metres) on 4700 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). Engine versions compliant with Euro 4 and Euro 5 emission standards available.
More engine specs
This Toyota Sienna 3.5 engine oil type is 5W-20, 5W-30 and oil capacity is 7.2 litres.
Toyota Sienna 2010 3.5i V6 has front wheel drive (FWD) and automatic gearbox with 6 gears.
Toyota Sienna 2010 3.5i V6 fuel consumption is 13.1 litres per 100km in combined city/highway mode (7.6 km/l), fuel consumption in city - 14.7 l/100km, highway fuel economy - 10.7 l/100km. Fuel tank capacity is 75 litres or 19.82 gallons, which gives a mileage up to 560 kilometers without refueling in urban cycle and even up to 700 kilometers on highway.
Toyota Sienna 2010 3.5i V6 technical data
| Model: | Toyota Sienna 3.5i V6 | ||
|---|---|---|---|
| Body style: | Minivan / MPV | ||
| Production period: | 2010. January ... 2017. December | ||
| Engine: | 3456 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
| Power: | 266 HP ON 6200 RPM | Torque: | 392 NM ON 4700 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 13.1 (combined) 14.7 (urban) 10.7 (highway) | ||
| Fuel tank capacity: | 75 litres (19.8 gallons) | ||
| Car dimensions: | 5.09m (length) 1.99m (width) 1.75m (height) | ||
| Turning diameter: | 11.4 meters | ||
| Ground clearance: | 168 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 993 litres | ||
| Trunk max capacity: | 3810 litres (with rear seats folded down) | ||
Toyota Sienna 2010 3.5i V6 engine 2GR-FE
| Engine displacement | 3456 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 94 mm |
| Stroke length (piston move) | 83 mm |
| Compression ratio | 10.8 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 300,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Injection |
| Toyota Sienna 2010 3.5i V6 oil type | 5W-20, 5W-30 |
| Oil capacity | 7.2 litres (7.6 quarts) More service info |
| Power | 250 - 280 HP ON 6200 RPM |
| Torque | 330 - 350 NM ON 4700 RPM |
| Start of production (year) | 2004 |
| Duration of production | 21 years |
| Engine also used on | Toyota RAV4 Lexus RX Toyota Camry Lexus ES and 2 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Toyota Sienna minivan [2010 - 2017] modifications
| Modification | Engine | Power | Consumption |
|---|---|---|---|
|
Toyota Sienna 2010 2.7i
Most fuel efficient version |
2.7 Petrol | 187 HP | 11.2 l/100km |
|
Toyota Sienna 2010 3.5i V6
Most powerfull version (266 HP) |
3.5 Petrol | 266 HP | 13.1 l/100km |