Jeep Wrangler 2017 3.6 petrol description
Jeep Wrangler 2017 3.6 4x4 has been produced from 2017 to 2023. It has six-cylinder petrol engine with displacement of 3.6 litres, which produces power of 285 horsepower on 6400 rpm and torque 353 Nm (Newton metres) on 4800 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). The engine meets the Euro 6 emissions standard. Engine lifespan (mileage before major repairs or overhaul) can last from 220 up to 370 thousand kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This Jeep Wrangler 3.6 engine oil type is 0W-20 and oil capacity is 4.7 litres.
Jeep Wrangler 2017 3.6 4x4 has all four wheel drive (AWD, 4x4) and manual gearbox with 6 gears.
Jeep Wrangler 2017 3.6 4x4 fuel consumption is 12.4 litres per 100km in combined city/highway mode (8.1 km/l), city fuel economy - 13.8 l/100km, fuel consumption on highway - 10.2 l/100km. Fuel tank capacity is 81 litres or 21.4 gallons, which gives a mileage up to 640 kilometers without refueling in urban cycle and even up to 780 kilometers on highway.
Jeep Wrangler safety
During safety testing Jeep Wrangler has obtained 1 star from five, which means very low safety level.
Adults (driver and passenger) safety of Jeep Wrangler is evaluated with low rate 50 from 100, children safety: average mark - 69 from 100, for pedestrian protection Jeep Wrangler got 49 points from 100.
Jeep Wrangler safety equipment has been rated as low - 32 percents from 100.
Jeep Wrangler 2017 3.6 4x4 technical data
| Model: | Jeep Wrangler 3.6 4x4 | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2017. January ... 2023. December | ||
| Engine: | 3604 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
| Power: | 285 HP ON 6400 RPM | Torque: | 353 NM ON 4800 RPM |
| Gearbox: | Manual gearbox (6 gears) | Drive type: | All wheel drive (AWD, 4x4) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 12.4 (combined) 13.8 (urban) 10.2 (highway) | ||
| Fuel tank capacity: | 81 litres (21.4 gallons) | ||
| Car dimensions: | 4.79m (length) 1.88m (width) 1.87m (height) | ||
| Turning diameter: | 12 meters | ||
| Ground clearance: | 274 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 548 litres | ||
| Trunk max capacity: | 1059 litres (with rear seats folded down, if possible) | ||
| Gross weight: | 2631 kg Net weight: 2018 kg Load capacity: 613 kg | ||
Jeep Wrangler 2017 3.6 4x4 engine ERC
Engine reliability:
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 3604 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 96 mm |
| Stroke length (piston move) | 83 mm |
| Compression ratio | 11.3 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 160,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Injection |
| Jeep Wrangler 2017 3.6 4x4 oil type | 0W-20 |
| Oil capacity | 4.7 litres (5 quarts) More service info |
| Coolant capacity | 10.1 litres (10.7 quarts) |
| Power | 285 - 305 HP ON 6400 RPM |
| Torque | 350 - 365 NM ON 4800 RPM |
| Start of production (year) | 2016 |
| Duration of production | 10 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2019 onwards. |
|
| Engine also used on | Chrysler Pacifica |
All Jeep Wrangler crossover [2017 - 2023] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Jeep Wrangler 2017 2.0 4x4
Most fuel efficient petrol version |
2.0 Petrol MHEV hybrid engine |
270 HP | 10.9 l/100km | Automatic (8) |
|
Jeep Wrangler 2021 Rubicon 2.0 Turbo 4x4
Jan 2021 — Dec 2023 Most dynamic version - 100 km/h in 6.4 seconds |
2.0 Hybrid PHEV |
270 HP | 4.1 l/100km | Automatic (8) |
| Jeep Wrangler 2017 2.2 Rubicon 4x4 Jan 2017 — Dec 2020 | 2.2 Diesel | 200 HP | 7.9 l/100km | Automatic (8) |
|
Jeep Wrangler 2017 2.2 Sahara 4x4
Jan 2017 — Dec 2020 Most fuel efficient diesel version |
2.2 Diesel | 200 HP | 7.6 l/100km | Automatic (8) |
|
Jeep Wrangler 2017 3.0 Rubicon EcoDiesel V6 4x4
Jan 2017 — Dec 2022 Most powerfull diesel version (260 HP) |
3.0 Diesel | 260 HP | 9.4 l/100km | Automatic (8) |
|
Jeep Wrangler 2017 3.0 Sport EcoDiesel V6 4x4
Jan 2017 — Dec 2022 Most powerfull diesel version (260 HP) |
3.0 Diesel | 260 HP | 9.4 l/100km | Automatic (8) |
|
Jeep Wrangler 2017 3.6 4x4
Only version with manual transmission |
3.6 Petrol | 285 HP | 12.4 l/100km | Manual (6) |
| Jeep Wrangler 2017 3.6 4x4 Automatic | 3.6 Petrol MHEV hybrid engine |
285 HP | 11.8 l/100km | Automatic (8) |
|
Jeep Wrangler 2017 6.4 Rubicon 392 V8 4x4
Most powerfull petrol version (470 HP) |
6.4 Petrol | 470 HP | 16.8 l/100km | Automatic (8) |