Chrysler 200 2014 3.6 petrol description
Sedan Chrysler 200 2014 3.6 V6 has been produced from January, 2015 to December, 2017. It has six-cylinder petrol engine with displacement of 3.6 litres, which produces power of 294 horsepower on 6350 rpm and torque 355 Nm (Newton metres) on 4250 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, it has no turbine. The engine meets the Euro 4 emissions standard. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 290 000 and 490 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their ...
This Chrysler 200 3.6 engine oil type is 5W-30 and oil capacity is 5.6 litres.
Chrysler 200 2014 3.6 V6 has front wheel drive (FWD) and automatic gearbox with 9 gears.
In combined cycle (city and motorway), the Chrysler 200 2014 3.6 V6 fuel consumption is 10.2 litres per 100km (9.8 km/l), fuel consumption in city - 12.4 l/100km, highway fuel economy - 7.6 l/100km. Fuel tank capacity is 60 litres or 15.85 gallons, which gives a mileage up to 580 kilometers without refueling in urban cycle and even up to 780 kilometers on highway.
Chrysler 200 2014 3.6 V6 technical data
| Model: | Chrysler 200 3.6 V6 | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2015. January ... 2017. December | ||
| Engine: | 3605 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
| Power: | 294 HP ON 6350 RPM | Torque: | 355 NM ON 4250 RPM |
| Gearbox: | Automatic gearbox (9 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 10.2 (combined) 12.4 (urban) 7.6 (highway) | ||
| Fuel tank capacity: | 60 litres (15.9 gallons) | ||
| Car dimensions: | 4.89m (length) 1.87m (width) 1.49m (height) | ||
| Turning diameter: | 12.1 meters | ||
| Ground clearance: | 147 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 453 litres | ||
| Gross weight: | 2092 kg | ||
Chrysler 200 2014 3.6 V6 engine ERB
Engine reliability and common problems:
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their limited lifespan. Another common issue is the clogging of oil channels with wear particles.After 100,000–150,000 km, the engine oil cooler, which also houses the oil filter, often begins to leak. It’s recommended to replace the entire unit with a genuine part, as non-original replacements are unreliable. Most of the time, oil leaks into the engine's V-section, in some cases, it mixes with coolant, causing serious complications.
The crankshaft seal is not reliable, and the thermostat housing often cracks. Additionally, for the first 20–30 seconds after engine start, particularly in near-zero or sub-zero temperatures, the accessory belt roller tends to make noticeable noise.
Overall, this engine can last around 290,000 to 490,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 3604 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 96 mm |
| Stroke length (piston move) | 83 mm |
| Compression ratio | 10.2 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Chrysler 200 2014 3.6 V6 oil type | 5W-30 |
| Oil capacity | 5.6 litres (5.9 quarts) |
| Coolant capacity | 8.2 litres (8.7 quarts) |
| Power | 280 - 310 HP ON 6350 RPM |
| Torque | 345 - 365 NM ON 4250 RPM |
| Start of production (year) | 2010 |
| Duration of production | 15 years |
| Engine also used on | Jeep Grand Cherokee Chrysler Grand Voyager Chrysler Town & Country and 7 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Chrysler 200 sedan [2014 - 2017] modifications
| Modification | Engine | Power | Consumption | Drive type |
|---|---|---|---|---|
|
Chrysler Chr 2014 ysler 200 2.4 4x4
Most fuel efficient version |
2.4 Petrol | 187 HP | 8.5 l/100km | All wheel |
| Chrysler 200 2015 3.6 V6 Jan 2015 — Dec 2017 | 3.6 Petrol | 294 HP | 10.2 l/100km | Front wheel |
|
Chrysler Chr 2014 ysler 200 3.6 4x4
Most dynamic version - 100 km/h in 6.5 seconds |
3.6 Petrol | 300 HP | 9.7 l/100km | All wheel |