Chrysler 200 2014 3.6 petrol description
Sedan Chrysler Chry 2014 sler 200 3.6 has been produced from January, 2014 to December, 2017. It has six-cylinder petrol engine with displacement of 3.6 litres, which produces power of 300 horsepower on 6500 rpm - this is the most powerfull Chrysler 200 2014 - 2017 version and torque 354 Nm (Newton metres) on 4250 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). The engine meets the Euro 4 emissions standard. Engine lifespan (mileage before major repairs or overhaul) can last from 290 up to 490 thousand kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their ...
This Chrysler 200 3.6 engine oil type is 5W-30 and oil capacity is 5.6 litres.
Chrysler Chry 2014 sler 200 3.6 has all four wheel drive (AWD, 4x4) and automatic gearbox with 9 gears.
Chrysler Chry 2014 sler 200 3.6 accelerates to speed 100 kilometres per hour in 6.5 seconds. The maximum speed of this car is 209 km/h.
Chrysler Chry 2014 sler 200 3.6 fuel consumption is 9.7 litres per 100km in combined city/highway mode (10.3 km/l) - this is one of most fuel efficient Chrysler 200 2014 - 2017 versions, fuel consumption in city - 11.8 l/100km, highway fuel economy - 7.6 l/100km. Fuel tank capacity is 60 litres or 15.85 gallons, which gives a mileage up to 600 kilometers without refueling in urban cycle and even up to 780 kilometers on highway.
Chrysler Chry 2014 sler 200 3.6 technical data
| Model: | Chrysler Chrysler 200 3.6 | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2014. January ... 2017. December | ||
| Engine: | 3600 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
| Power: | 300 HP ON 6500 RPM | Torque: | 354 NM ON 4250 RPM |
| Gearbox: | Automatic gearbox (9 gears) | Drive type: | All wheel drive (AWD, 4x4) |
| Top speed: | 209 km/h | Acceleration 0-100 km/h: | 6.5 seconds |
| Fuel consumption (l/100km): | 9.7 (combined) 11.8 (urban) 7.6 (highway) | ||
| Fuel tank capacity: | 60 litres (15.9 gallons) | ||
| Car dimensions: | 4.89m (length) 1.87m (width) 1.49m (height) | ||
| Turning diameter: | 12.1 meters | ||
| Ground clearance: | 147 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 463 litres | ||
| Gross weight: | 2240 kg | ||
Chrysler Chry 2014 sler 200 3.6 engine ERB
Engine reliability and common problems:
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their limited lifespan. Another common issue is the clogging of oil channels with wear particles.After 100,000–150,000 km, the engine oil cooler, which also houses the oil filter, often begins to leak. It’s recommended to replace the entire unit with a genuine part, as non-original replacements are unreliable. Most of the time, oil leaks into the engine's V-section, in some cases, it mixes with coolant, causing serious complications.
The crankshaft seal is not reliable, and the thermostat housing often cracks. Additionally, for the first 20–30 seconds after engine start, particularly in near-zero or sub-zero temperatures, the accessory belt roller tends to make noticeable noise.
Overall, this engine can last around 290,000 to 490,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 3604 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 96 mm |
| Stroke length (piston move) | 83 mm |
| Compression ratio | 10.2 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Chrysler Chry 2014 sler 200 3.6 oil type | 5W-30 |
| Oil capacity | 5.6 litres (5.9 quarts) |
| Coolant capacity | 8.2 litres (8.7 quarts) |
| Power | 280 - 310 HP ON 6500 RPM |
| Torque | 345 - 365 NM ON 4250 RPM |
| Start of production (year) | 2010 |
| Duration of production | 15 years |
| Engine also used on | Jeep Grand Cherokee Chrysler Grand Voyager Chrysler Town & Country and 7 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
Most often compared to
All Chrysler 200 sedan [2014 - 2017] modifications
| Modification | Engine | Power | Consumption | Drive type |
|---|---|---|---|---|
|
Chrysler Chr 2014 ysler 200 2.4 4x4
Most fuel efficient version |
2.4 Petrol | 187 HP | 8.5 l/100km | All wheel |
| Chrysler 200 2015 3.6 V6 Jan 2015 — Dec 2017 | 3.6 Petrol | 294 HP | 10.2 l/100km | Front wheel |
|
Chrysler Chr 2014 ysler 200 3.6 4x4
Most dynamic version - 100 km/h in 6.5 seconds |
3.6 Petrol | 300 HP | 9.7 l/100km | All wheel |