CHRYSLER 200 2010 3.6L V6
Chrysler 200 2010 3.6 petrol description
Sedan CHRYSLER 200 2010 3.6L V6 has been produced from January, 2010 to January, 2014. It has six-cylinder petrol engine with displacement of 3.6 litres, which produces power of 287 horsepower on 6400 rpm - this is the most powerfull Chrysler 200 2010 - 2014 version and torque 353 Nm (Newton metres) on 4400 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system without turbocharger. The engine meets the Euro 4 emissions standard. Average engine life expectancy (mileage before serious repairs are needed) is from 290 000 to 490 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their ...
This Chrysler 200 3.6 engine oil type is 5W-30 and oil capacity is 5.6 litres.
CHRYSLER 200 2010 3.6L V6 has front wheel drive (FWD) and automatic gearbox with 6 gears.
CHRYSLER 200 2010 3.6L V6 accelerates to speed 100 kilometres per hour in 6.5 seconds. The maximum speed of this car is 193 km/h.
The fuel consumption of this CHRYSLER 200 2010 3.6L V6 in combined mode (combining urban and highway driving) is 8.1 litres per 100km (12.3 km/l) - this is the most fuel efficient Chrysler 200 2010 - 2014 version, fuel consumption in city - 8.1 l/100km, highway fuel economy - 12.4 l/100km. Fuel tank capacity is 64 litres or 16.91 gallons, which gives a mileage up to 780 kilometers without refueling in urban cycle and even up to 500 kilometers on highway.

CHRYSLER 200 2010 3.6L V6 technical data
Model: | CHRYSLER 200 3.6L V6 | ||
---|---|---|---|
Body style: | Sedan | ||
Production period: | 2010. January ... 2014. January | ||
Engine: | 3605 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
Power: | 287 HP ON 6400 RPM | Torque: | 353 NM ON 4400 RPM |
Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
Maximum speed: | 193 km/h | Acceleration 0-100 km/h: | 6.5 seconds |
Fuel consumption (l/100km): | 8.1 (combined) 8.1 (urban) 12.4 (highway) | ||
Fuel tank capacity: | 64 litres (16.9 gallons) | ||
Car dimensions: | 4.87m (length) 1.84m (width) 1.48m (height) | ||
Turning diameter: | 11.2 meters | ||
Seats: | 5 seats | ||
Trunk capacity: | 385 litres | ||
Gross weight: | 2087 kg |
CHRYSLER 200 2010 3.6L V6 engine ERB
Engine reliability and common problems:
The variable valve timing regulators, oil pump, water pump, and thermostat are known for their limited lifespan. Another common issue is the clogging of oil channels with wear particles.After 100,000–150,000 km, the engine oil cooler, which also houses the oil filter, often begins to leak. It’s recommended to replace the entire unit with a genuine part, as non-original replacements are unreliable. Most of the time, oil leaks into the engine's V-section, in some cases, it mixes with coolant, causing serious complications.
The crankshaft seal is not reliable, and the thermostat housing often cracks. Additionally, for the first 20–30 seconds after engine start, particularly in near-zero or sub-zero temperatures, the accessory belt roller tends to make noticeable noise.
Overall, this engine can last around 290,000 to 490,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
Engine displacement | 3604 cm3 |
---|---|
Number of cylinders | 6 |
Bore (cylinder diameter) | 96 mm |
Stroke length (piston move) | 83 mm |
Compression ratio | 10.2 : 1 |
Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
Fuel system | Injection |
CHRYSLER 200 2010 3.6L V6 oil type | 5W-30 |
Oil capacity | 5.6 litres (5.9 quarts) |
Coolant capacity | 11 litres (11.6 quarts) |
Power | 280 - 310 HP ON 6400 RPM |
Torque | 345 - 365 NM ON 4400 RPM |
Start of production (year) | 2010 |
Duration of production | 15 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2013 onwards. |
|
Engine also used on | Jeep Grand Cherokee Chrysler Grand Voyager Chrysler Town & Country and 7 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Chrysler 200 sedan [2010 - 2014] modifications
Modification | Engine | Power | Consumption |
---|---|---|---|
CHRYSLER 200 2010 2.4L Jan 2010 — Jan 2014 | 2.4 Petrol | 173 HP | 10.2 l/100km |
Chrysler 200 2010 2.4 | 2.4 Petrol | 175 HP | 9.8 l/100km |
CHRYSLER 200 2010 3.6L V6
Jan 2010 — Jan 2014 Most dynamic version - 100 km/h in 6.5 seconds |
3.6 Petrol | 287 HP | 8.1 l/100km |