SAAB 9-3 2010 Sport Sedan 2.0T
SAAB 9-3 2010 2.0 petrol description
Sedan SAAB 9-3 2010 Sport Sedan 2.0T has been produced from January, 2010 to January, 2011. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 210 horsepower on 5500 rpm and torque 300 Nm (Newton metres) on 2000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system and MHI TD0411TK turbine. Engine versions compliant with Euro 4 and Euro 5 emission standards available. Average engine life expectancy (mileage before serious repairs are needed) is from 240 000 to 400 000 kilometres. It is important to remember that engine life is highly dependent on regular maintenance and the quality of the oils and fuels used.
More engine specs
The Saab B207 engine is essentially identical to the Opel Z20NET and is based on a 2.2-liter naturally aspirated predecessor. It is a simple and reliable engine, even less demanding than its predecessor. However, it has some notable weaknesses.
The timing and balance shaft chains have ...
This SAAB 9-3 2.0 engine oil type is 5W-30 and oil capacity is 5.7 litres.
SAAB 9-3 2010 Sport Sedan 2.0T has front wheel drive (FWD) and automatic gearbox with 5 gears.
SAAB 9-3 2010 Sport Sedan 2.0T accelerates to speed 100 kilometres per hour in 9.1 seconds. The maximum speed of this car is 230 km/h.
The fuel consumption of this SAAB 9-3 2010 Sport Sedan 2.0T in combined mode (combining urban and highway driving) is 9.1 litres per 100km (11 km/l), fuel consumption in city - 13.7 l/100km, highway fuel economy - 6.5 l/100km..

SAAB 9-3 2010 Sport Sedan 2.0T technical data
Model: | SAAB 9-3 Sport Sedan 2.0T | ||
---|---|---|---|
Body style: | Sedan | ||
Production period: | 2010. January ... 2011. January | ||
Engine: | 1998 cm3 Petrol, 4 cylinders | CO2 emissions: | 218 g/km |
Power: | 210 HP ON 5500 RPM | Torque: | 300 NM ON 2000 RPM |
Gearbox: | Automatic gearbox (5 gears) | Drive type: | Front wheel drive (FWD) |
Maximum speed: | 230 km/h | Acceleration 0-100 km/h: | 9.1 seconds |
Fuel consumption (l/100km): | 9.1 (combined) 13.7 (urban) 6.5 (highway) | ||
Car dimensions: | 4.65m (length) 2.04m (width) 1.47m (height) | ||
Trunk capacity: | 351 litres | ||
Gross weight: | 1980 kg |
SAAB 9-3 2010 Sport Sedan 2.0T engine B207R
Engine reliability and common problems:
The Saab B207 engine is essentially identical to the Opel Z20NET and is based on a 2.2-liter naturally aspirated predecessor. It is a simple and reliable engine, even less demanding than its predecessor. However, it has some notable weaknesses.The timing and balance shaft chains have a limited lifespan and often stretch before reaching 200,000 km. The turbocharger performs well overall, but failures of the wastegate valve are common. The PCV system valve is also prone to premature failure. Other problematic components include the ECU, fuel pump, electronic throttle, and crankshaft position sensor.
Contaminated electronic throttle bodies cause symptoms such as unstable idle, sluggish throttle response, increased fuel consumption, and reduced power. However, cleaning the throttle body often doesn’t suffice because the gears in the servo mechanism may wear out or break, requiring replacement of the entire throttle assembly.
The in-tank fuel pump is another common issue. Problems typically arise due to prolonged use of poor-quality fuel, leading to a clogged intake screen or motor failure. Symptoms include jerking during acceleration, unstable idle, and stalling, especially in hot weather. Repairs often involve replacing the entire pump module or retrofitting a compatible electric motor.
The crankshaft position sensor is unreliable, leading to issues like stalling, failure to start when hot, or complete engine non-start. These failures are generally easy to diagnose.
The engine control unit (ECU) is located in a heat-prone area and typically fails by 250,000 km. Before total failure, injector circuit faults, misfires, stalling, and white exhaust smoke are common symptoms. The ECU is not repairable and must be replaced and reprogrammed.
The PCV valve, located in the intake manifold, can fail, disrupting ventilation and causing power loss, sluggish throttle response, and oil leaks at various seals. A telltale sign of a malfunctioning PCV valve is oil residue in the intake near the throttle body.
Turbochargers on the B207 vary depending on the production year and power rating. High-powered models (210 hp) use the Mitsubishi TD04-14T turbo, while lower-powered variants (150–175 hp) originally featured Garrett GT2052 turbos until 2006, when they switched to the Mitsubishi TD04-11TK. Both types are reliable but require regular maintenance to avoid issues.
Overall, this engine can last around 240,000 to 400,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
Engine displacement | 1998 cm3 |
---|---|
Number of cylinders | 4 |
Bore (cylinder diameter) | 86 mm |
Stroke length (piston move) | 86 mm |
Compression ratio | 9.5 : 1 |
Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
Timing chain change interval | 170,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
Fuel system | Injection |
SAAB 9-3 2010 Sport Sedan 2.0T oil type | 5W-30 |
Oil capacity | 5.7 litres (6 quarts) More service info |
Power | 210 HP ON 5500 RPM |
Torque | 300 NM ON 2000 RPM |
Start of production (year) | 2002 |
Duration of production | 10 years |
Most often compared to
All SAAB 9-3 sedan [2010 - 2011] modifications
Modification | Engine | Power | Consumption | Gearbox | Drive type |
---|---|---|---|---|---|
SAAB 9-3 2010 Sport Sedan 1.8i | 1.8 Petrol | 122 HP | 7.7 l/100km | Manual (5) | Front wheel |
SAAB 9-3 2010 Sport Sedan 1.8t | 1.8 Petrol | 150 HP | 8.0 l/100km | Automatic (5) | Front wheel |
SAAB 9-3 2010 Sport Sedan 1.9 TiD | 1.9 Diesel | 150 HP | 6.6 l/100km | Manual (6) | Front wheel |
SAAB 9-3 2010 Sport Sedan 1.9 TiD | 1.9 Diesel | 150 HP | 6.6 l/100km | Automatic (6) | Front wheel |
SAAB 9-3 2010 Sport Sedan 1.9T TiD
Most powerfull diesel version (180 HP) |
1.9 Diesel | 180 HP | 5.3 l/100km | Manual (6) | Front wheel |
SAAB 9-3 2010 Sport Sedan 1.9T TiD
Most powerfull diesel version (180 HP) |
1.9 Diesel | 180 HP | 6.4 l/100km | Automatic (6) | Front wheel |
Saab 9-3 2010 2.0 Sport Sedan 1.8
Most fuel efficient petrol version |
2.0 Petrol | 150 HP | 7.4 l/100km | Manual (6) | Front wheel |
Saab 9-3 Sport Sedan 2.0
Most fuel efficient petrol version |
2.0 Petrol | 175 HP | 7.4 l/100km | Manual (6) | Front wheel |
Saab 9-3 2010 Sport Sedan 2.0 | 2.0 Petrol | 175 HP | 9.0 l/100km | Automatic (5) | Front wheel |
SAAB 9-3 2010 Sport Sedan 2.0T | 2.0 Petrol | 210 HP | 7.8 l/100km | Manual (6) | Front wheel |
SAAB 9-3 2010 Sport Sedan 2.0T | 2.0 Petrol | 210 HP | 9.1 l/100km | Automatic (5) | Front wheel |
SAAB 9-3 2010 Sport Sedan 2.8 V6 Turbo | 2.8 Petrol | 280 HP | 10.0 l/100km | Manual (6) | Front wheel |
SAAB 9-3 2010 Sport Sedan 2.8 V6 Turbo | 2.8 Petrol | 280 HP | 10.2 l/100km | Automatic (6) | Front wheel |
SAAB 9-3 2010 Sport Sedan 2.8 V6 Turbo 4x4
Most dynamic version - 100 km/h in 6.1 seconds |
2.8 Petrol | 280 HP | 10.0 l/100km | Manual (6) | All wheel |
SAAB 9-3 2010 Sport Sedan 2.8 V6 Turbo 4x4 | 2.8 Petrol | 280 HP | 10.6 l/100km | Automatic (6) | All wheel |