Renault Megane 2020 vs Peugeot 308 2017
Gearbox: | Manual | Manual | |
---|---|---|---|
Engine: | 1.3 Petrol | 1.2 Petrol | |
Camshaft drive: | Timing chain | Timing belt | |
Engine chain usually needs to be replaced less often than the timing belt, but the cost of replacing the chain is usually higher. Chain motors are considered to be more reliable, but noisier and more vibration generating. | |||
Performance | |||
Power: | 115 HP | 110 HP | |
Torque: | 220 NM | 205 NM | |
Acceleration 0-100 km/h: | 11 seconds | 11.6 seconds | |
Renault Megane is more dynamic to drive. Renault Megane engine produces 5 HP more power than Peugeot 308, whereas torque is 15 NM more than Peugeot 308. Thanks to more power Renault Megane reaches 100 km/h speed 0.6 seconds faster. | |||
Fuel consumption | |||
Fuel consumption (l/100km): | no data | 4.7 | |
Fuel tank capacity: | 47 litres | 53 litres | |
790 km with real consumption | 770 km with real consumption | ||
Ground clearance: | 145 mm (5.7 inches) | 110 mm (4.3 inches) | |
Because of the higher ground clearance, Renault Megane can perform better on bad roads - it can go over higher obstacles and bumps. At the same time, the higher ground clearance can reduce stability and handling on paved roads, especially at higher speeds. Note, however, that this Renault Megane version does not have 4x4 drive, which is very important in poor road conditions. | |||
Engines | |||
Average engine lifespan: | 350'000 km | 370'000 km | |
Engine resource depends largely on regular maintenance and the quality of the oils and fuels used. | |||
Engine production duration: | 8 years | 11 years | |
Engine spread: | Installed on at least 8 other car models, including Renault Scenic, Dacia Duster, Dacia Dokker | Installed on at least 10 other car models, including Citroen C3, Opel Combo, Peugeot 2008, Citroen C4 | |
In general, the longer and for more car models an engine is produced, the better its serviceability and availability of spare parts. Peugeot 308 might be a better choice in this respect. | |||
Hydraulic tappets: | yes | no | |
The Renault Megane engine has hydraulic tappets (lifters), providing quieter operation and no need for periodic adjustment, but they are more complex in design and can cause serious engine damage in case of failure. | |||
Renault Megane 2020 1.3 engine: The engine is reliable. However, in the event of problems, getting spare parts and repairs can be difficult. Fuel consumption is reasonable, and the engine is not too demanding on fuel quality. Peugeot 308 2017 1.2 engine: Because the timing belt is placed in oil, it doesn't last the intended 180,000 kilometers, and its wear products clog the oilways. First years of engines have been recalled due to axial play in the crankshaft. | |||
Dimensions | |||
Length: | 4.63 m | 4.59 m | |
Width: | 1.87 m | 1.80 m | |
Height: | 1.46 m | 1.47 m | |
Renault Megane is larger, but slightly lower. Renault Megane is 4 cm longer than the Peugeot 308, 7 cm wider, while the height of Renault Megane is 1 cm lower. | |||
Trunk capacity: | 521 litres | 610 litres | |
Trunk max capacity: with rear seats folded down |
1504 litres | 1660 litres | |
Peugeot 308 has more luggage space. Despite its longer length, Renault Megane has 89 litres less trunk space than the Peugeot 308. This could mean that the Renault Megane uses more space in the cabin, so the driver and passengers could be more spacious and comfortable. The maximum boot capacity (with all rear seats folded down) is larger in Peugeot 308 (by 156 litres). | |||
Turning diameter: | 11.4 meters | 10.4 meters | |
The turning circle of the Renault Megane is 1 metres more than that of the Peugeot 308, which means Renault Megane can be harder to manoeuvre in tight streets and parking spaces. | |||
Gross weight (kg): | 1`859 | 1`825 | |
Safety: | no data | no data | |
Quality: | no data | below average | |
Average price (€): | 18 600 | 9400 | |
Pros and Cons: |
Renault Megane has
|
Peugeot 308 has
| |