BMW 745i (E65/E66)
BMW 7 series 2001 4.4 petrol description
Sedan BMW 745i has been produced from November, 2001 to April, 2005. It has eight-cylinder petrol engine with displacement of 4.4 litres, which produces power of 333 horsepower on 6100 rpm and torque 450 Nm (Newton metres) on 3600 revolutions per minute.
This 8-cylinder 32-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, it has no turbine. Engine versions compliant with Euro 3 and Euro 4 emission standards available. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 280 000 and 480 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
The main problems with the N62 engine are related to malfunctions in the Valvetronic and VANOS ...
This BMW 7 series 4.4 engine oil type is 5W-30 and oil capacity is 8 litres.
BMW 745i has classical rear wheel drive (RWD) and automatic gearbox with 6 gears.
BMW 745i accelerates to speed 100 kilometres per hour in 6.3 seconds. The maximum speed of this car is 250 km/h.
In combined cycle (city and motorway), the BMW 745i fuel consumption is 11 litres per 100km (9.1 km/l), fuel consumption in city - 16 l/100km, highway fuel economy - 8.3 l/100km. Fuel tank capacity is 88 litres or 23.25 gallons, which gives a mileage up to 800 kilometers without refueling in urban cycle and even up to 1060 kilometers on highway.
According to user reviews, this BMW real everyday fuel consumption is 13 litres per 100 km, which is 18% more than the manufacturer's stated. More - Real BMW 7 series fuel consumption.
BMW 745i technical data
| Model: | BMW 745i | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2001. November ... 2005. April | ||
| Engine: | 4398 cm3 Petrol, 8 cylinders | CO2 emissions: | 263 g/km |
| Power: | 333 HP ON 6100 RPM | Torque: | 450 NM ON 3600 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Rear wheel drive (RWD) |
| Top speed: | 250 km/h | Acceleration 0-100 km/h: | 6.3 seconds |
| Fuel consumption (l/100km): | 11.0 (combined) 16.0 (urban) 8.3 (highway) | ||
| Real fuel consumption: | 13 l/100km (18.1 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 88 litres (23.2 gallons) | ||
| Car dimensions: | 5.03m (length) 1.90m (width) 1.49m (height) | ||
| Turning diameter: | 12 meters | ||
| Trunk capacity: | 500 litres | ||
| Gross weight: | 2450 kg | ||
BMW 745i engine N62B44
Engine reliability and common problems:
The main problems with the N62 engine are related to malfunctions in the Valvetronic and VANOS systems. Fluctuating idle is usually caused by ignition coil failure, air leaks, MAF sensor problems or problems in the Valvetronic system.Another common problem is increased oil consumption due to valve stem seal wear. Typically, oil consumption problems start around 100,000km, with worn valve stem seals being the main cause. After a further 100,000km the oil control rings often fail.
Oil leaks from the generator housing gasket and crankshaft seal are also common.
As mileage increases, debris from a deteriorating catalytic converter can be sucked into the cylinders, causing significant damage. To minimise problems and extend engine life, it is essential to use high quality oil and fuel and to carry out regular maintenance.
Overall, this engine can last around 280,000 to 480,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 4398 cm3 |
|---|---|
| Number of cylinders | 8 |
| Bore (cylinder diameter) | 92 mm |
| Stroke length (piston move) | 82.7 mm |
| Compression ratio | 10 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| BMW 745i oil type | 5W-30 |
| Oil capacity | 8 litres (8.5 quarts) |
| Power | 320 - 333 HP ON 6100 RPM |
| Torque | 440 - 450 NM ON 3600 RPM |
| Start of production (year) | 2001 |
| Duration of production | 9 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2004 onwards. |
|
| Engine also used on | BMW 5 sērija BMW X5 BMW 6 sērija |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All BMW 7 series sedan [2001 - 2005] modifications
| Modification | Engine | Power | Consumption |
|---|---|---|---|
|
BMW 730i
Mar 2003 — Apr 2005 Most fuel efficient petrol version |
3.0 Petrol | 231 HP | 11.0 l/100km |
|
BMW 730Li
Mar 2003 — Apr 2005 Most fuel efficient petrol version |
3.0 Petrol | 231 HP | 11.0 l/100km |
|
BMW 730d
Sep 2002 — Apr 2005 Most fuel efficient diesel version |
3.0 Diesel | 218 HP | 8.5 l/100km |
|
BMW 735i
Most fuel efficient petrol version |
3.6 Petrol | 272 HP | 11.0 l/100km |
|
BMW 735Li
Mar 2002 — Apr 2005 Most fuel efficient petrol version |
3.6 Petrol | 272 HP | 11.0 l/100km |
|
BMW 740d
Sep 2002 — Apr 2005 Most powerfull diesel version (259 HP) |
3.9 Diesel | 259 HP | 9.7 l/100km |
|
BMW 745i
Most fuel efficient petrol version |
4.4 Petrol | 333 HP | 11.0 l/100km |
|
BMW 745Li
Mar 2002 — Apr 2005 Most fuel efficient petrol version |
4.4 Petrol | 333 HP | 11.0 l/100km |
|
BMW 760i
Jan 2003 — Apr 2005 Most dynamic version - 100 km/h in 5.5 seconds |
6.0 Petrol | 445 HP | 13.0 l/100km |
|
BMW 760Li
Jan 2003 — Apr 2005 Most powerfull petrol version (445 HP) |
6.0 Petrol | 445 HP | 14.0 l/100km |