Mazda 3 2016 2.0 SkyActiv-G Automatic
Mazda 3 2016 2.0 petrol description
Sedan Mazda 3 2016 2.0 SkyActiv-G Automatic has been produced from January, 2018 to December, 2018. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 155 horsepower on 6000 rpm and torque 203 Nm (Newton metres) on 4000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). Engine versions compliant with Euro 4 and Euro 5 emission standards available. Engine lifespan (mileage before major repairs or overhaul) can last from 270 up to 450 thousand kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The ...
This Mazda 3 2.0 engine oil type is 0W-20 and oil capacity is 4.2 litres.
Mazda 3 2016 2.0 SkyActiv-G Automatic has front wheel drive (FWD) and automatic gearbox with 6 gears.
Mazda 3 2016 2.0 SkyActiv-G Automatic fuel consumption is 7.6 litres per 100km in combined city/highway mode (13.2 km/l), fuel consumption in city - 8.4 l/100km, highway fuel economy - 6.4 l/100km. Fuel tank capacity is 51 litres or 13.47 gallons, which gives a mileage up to 660 kilometers without refueling in urban cycle and even up to 780 kilometers on highway.
Mazda 3 2016 2.0 SkyActiv-G Automatic technical data
| Model: | Mazda 3 2.0 SkyActiv-G Automatic | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2018. January ... 2018. December | ||
| Engine: | 1998 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 155 HP ON 6000 RPM | Torque: | 203 NM ON 4000 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 7.6 (combined) 8.4 (urban) 6.4 (highway) | ||
| Fuel tank capacity: | 51 litres (13.5 gallons) | ||
| Car dimensions: | 4.58m (length) 1.80m (width) 1.45m (height) | ||
| Turning diameter: | 10.6 meters | ||
| Ground clearance: | 155 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 351 litres | ||
Mazda 3 2016 2.0 SkyActiv-G Automatic engine PE-VPS
Engine reliability and common problems:
This engine is not well-suited for low-quality fuel, as it quickly clogs the fuel system. The use of substandard fuel often leads to the failure of expensive ignition coils, resulting in significant repair costs. Additionally, due to wear on the plastic tensioner pulley, the serpentine belt frequently breaks.The engine is also prone to increased oil consumption, which can be observed even from the very first kilometers. To avoid these issues, it is crucial to use high-quality fuel and perform regular maintenance.
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1997 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 83.5 mm |
| Stroke length (piston move) | 91.2 mm |
| Compression ratio | 13 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Mazda 3 2016 2.0 SkyActiv-G Automatic oil type | 0W-20 |
| Oil capacity | 4.2 litres (4.4 quarts) |
| Power | 150 - 165 HP ON 6000 RPM |
| Torque | 200 - 210 NM ON 4000 RPM |
| Start of production (year) | 2012 |
| Duration of production | 13 years |
| Engine also used on | Mazda 6 Mazda MX-5 Mazda CX-5 Mazda CX-3 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Mazda 3 sedan [2016 - 2019] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
MAZDA 3 2016 / Axela Sedan 1.5L SKYACTIV-G
Most fuel efficient petrol version by real consumption |
1.5 Petrol | 100 HP | - | Manual (6) |
| Mazda 3 2016 Sedan 1.5 | 1.5 Petrol | 120 HP | 5.8 l/100km | Automatic (6) |
|
MAZDA 3 2016 / Axela Sedan 1.5L SKYACTIV-D
Most fuel efficient diesel version |
1.5 Diesel | 105 HP | 3.8 l/100km | Manual (6) |
| MAZDA 3 2016 / Axela Sedan 1.5L SKYACTIV-D Automatic | 1.5 Diesel | 105 HP | - | Automatic (6) |
| Mazda 3 2016 Sedan 1.6 | 1.6 Petrol | 104 HP | 6.3 l/100km | Automatic (4) |
|
MAZDA 3 2016 / Axela Sedan 2.0L SKYACTIV-G
Most fuel efficient petrol version |
2.0 Petrol | 120 HP | 5.1 l/100km | Manual (6) |
| MAZDA 3 2016 / Axela Sedan 2.0L SKYACTIV-G Automatic | 2.0 Petrol | 120 HP | 5.6 l/100km | Automatic (6) |
| Mazda 3 2018 2.0 SkyActiv-G Jan 2018 — Dec 2018 | 2.0 Petrol | 155 HP | 7.6 l/100km | Manual (6) |
| Mazda 3 2018 2.0 SkyActiv-G Automatic Jan 2018 — Dec 2018 | 2.0 Petrol | 155 HP | 7.6 l/100km | Automatic (6) |
|
MAZDA 3 2016 / Axela Sedan 2.2L SKYACTIV-D
Most dynamic version - 100 km/h in 8 seconds |
2.2 Diesel | 150 HP | 3.9 l/100km | Manual (6) |
|
Mazda 3 2018 2.5 SkyActiv-G
Jan 2018 — Dec 2018 Most powerfull petrol version (184 HP) |
2.5 Petrol | 184 HP | 8.1 l/100km | Manual (6) |
|
Mazda 3 2018 2.5 SkyActiv-G Automatic
Jan 2018 — Dec 2018 Most powerfull petrol version (184 HP) |
2.5 Petrol | 184 HP | 7.8 l/100km | Automatic (6) |