Kia Cerato 2018 2.0 petrol description
Sedan Kia Cerato 2018 2.0 MPI is being produced from January, 2018. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 152 horsepower on 6200 rpm and torque 192 Nm (Newton metres) on 4000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). Engine versions compliant with Euro 4 and Euro 5 emission standards available.
More engine specs
This Kia Cerato 2.0 engine oil type is 5W-20, 5W-30 and oil capacity is 4.5 litres.
Kia Cerato 2018 2.0 MPI has front wheel drive (FWD) and manual gearbox with 6 gears.
Kia Cerato 2018 2.0 MPI fuel consumption is 7.6 litres per 100km in combined city/highway mode (13.2 km/l) - this is one of most fuel efficient Kia Cerato 2018 versions, fuel consumption in city - 10.5 l/100km, highway fuel economy - 5.9 l/100km. Fuel tank capacity is 50 litres or 13.21 gallons, which gives a mileage up to 640 kilometers without refueling in urban cycle and even up to 840 kilometers on highway.
Kia Cerato 2018 2.0 MPI technical data
| Model: | Kia Cerato 2.0 MPI | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2018. January | ||
| Engine: | 1999 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 152 HP ON 6200 RPM | Torque: | 192 NM ON 4000 RPM |
| Gearbox: | Manual gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 7.6 (combined) 10.5 (urban) 5.9 (highway) | ||
| Fuel tank capacity: | 50 litres (13.2 gallons) | ||
| Car dimensions: | 4.64m (length) 1.80m (width) 1.45m (height) | ||
| Turning diameter: | 10.6 meters | ||
| Ground clearance: | 150 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 502 litres | ||
| Gross weight: | 1720 kg | ||
Kia Cerato 2018 2.0 MPI engine G4NA
| Engine displacement | 1999 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 81 mm |
| Stroke length (piston move) | 97 mm |
| Compression ratio | 10.3 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 180,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Injection |
| Kia Cerato 2018 2.0 MPI oil type | 5W-20, 5W-30 |
| Oil capacity | 4.5 litres (4.8 quarts) More service info |
| Power | 150 - 167 HP ON 6200 RPM |
| Torque | 190 - 200 NM ON 4000 RPM |
| Engine manufacturer | Hyundai |
| Start of production (year) | 2010 |
| Duration of production | 15 years |
| Engine also used on | Kia Sportage Hyundai Sonata Hyundai Tucson Hyundai i40 Kia Optima and 2 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Kia Cerato sedan [2018 modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
| Kia Cerato 2018 1.6 | 1.6 Petrol | 128 HP | 7.1 l/100km | Manual (6) |
| Kia Cerato 2018 1.6 | 1.6 Petrol | 128 HP | 7.2 l/100km | Automatic (6) |
|
Kia Cerato 2018 GT 1.6 T-GDI
Most powerfull version (204 HP) |
1.6 Petrol | 204 HP | 6.8 l/100km | Automatic (7) |
|
Kia Cerato 2018 2.0
Most dynamic version - 100 km/h in 9.8 seconds |
2.0 Petrol | 150 HP | 7.4 l/100km | Automatic (6) |
| Kia Cerato 2018 2.0 MPI | 2.0 Petrol | 152 HP | 7.6 l/100km | Manual (6) |