Jeep Wrangler 2017 3.6 petrol description
Crossover / SUV Jeep Wrangler 2017 3.6 4x4 is being produced from January, 2017. It has six-cylinder petrol engine with displacement of 3.6 litres, which produces power of 285 horsepower on 6400 rpm - this is the most powerfull Jeep Wrangler 2017 version and torque 353 Nm (Newton metres) on 4800 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system without turbocharger. The engine meets the Euro 6 emissions standard. Average engine life expectancy (mileage before serious repairs are needed) is from 220 000 to 370 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This Jeep Wrangler 3.6 engine oil type is 0W-20 and oil capacity is 4.7 litres.
Jeep Wrangler 2017 3.6 4x4 has all four wheel drive (AWD, 4x4) and manual gearbox with 6 gears.
The fuel consumption of this Jeep Wrangler 2017 3.6 4x4 in combined mode (combining urban and highway driving) is 12.4 litres per 100km (8.1 km/l) - this is one of most fuel efficient Jeep Wrangler 2017 versions, city fuel economy - 13.8 l/100km, fuel consumption on highway - 10.2 l/100km. Fuel tank capacity is 70 litres or 18.49 gallons, which gives a mileage up to 560 kilometers without refueling in urban cycle and even up to 680 kilometers on highway.
Jeep Wrangler safety
During safety testing Jeep Wrangler has obtained 1 star from five, which means very low safety level.
Adults (driver and passenger) safety of Jeep Wrangler is evaluated with low rate 50 from 100, children safety: average mark - 69 from 100, for pedestrian protection Jeep Wrangler got 49 points from 100.
Jeep Wrangler safety equipment has been rated as low - 32 percents from 100.
Jeep Wrangler 2017 3.6 4x4 technical data
| Model: | Jeep Wrangler 3.6 4x4 | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2017. January | ||
| Engine: | 3604 cm3 Petrol, 6 cylinders | CO2 emissions: | no data |
| Power: | 285 HP ON 6400 RPM | Torque: | 353 NM ON 4800 RPM |
| Gearbox: | Manual gearbox (6 gears) | Drive type: | All wheel drive (AWD, 4x4) |
| Maximum speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 12.4 (combined) 13.8 (urban) 10.2 (highway) | ||
| Fuel tank capacity: | 70 litres (18.5 gallons) | ||
| Car dimensions: | 4.24m (length) 1.88m (width) 1.87m (height) | ||
| Turning diameter: | 10.5 meters | ||
| Ground clearance: | 246 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 4 seats | ||
| Trunk capacity: | 897 litres | ||
| Trunk max capacity: | 1560 litres (with rear seats folded down) | ||
Jeep Wrangler 2017 3.6 4x4 engine ERC
Engine reliability:
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 3604 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 96 mm |
| Stroke length (piston move) | 83 mm |
| Compression ratio | 11.3 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 160,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Injection |
| Jeep Wrangler 2017 3.6 4x4 oil type | 0W-20 |
| Oil capacity | 4.7 litres (5 quarts) More service info |
| Power | 285 - 305 HP ON 6400 RPM |
| Torque | 350 - 365 NM ON 4800 RPM |
| Start of production (year) | 2016 |
| Duration of production | 9 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2019 onwards. |
|
| Engine also used on | Chrysler Pacifica |
All Jeep Wrangler crossover [2017 modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Jeep Wrangler 2017 2.0 4x4
Most fuel efficient version by real consumption |
2.0 Petrol | 270 HP | - | Automatic (8) |
|
Jeep Wrangler 2017 3.6 4x4
Most powerfull version (285 HP) |
3.6 Petrol | 285 HP | 12.4 l/100km | Manual (6) |
|
Jeep Wrangler 2017 3.6 4x4 Automatic
Most powerfull version (285 HP) |
3.6 Petrol | 285 HP | 11.8 l/100km | Automatic (8) |