Hyundai Santa Fe 2018 2.0 CRDi 4WD
Hyundai Santa FE 2018 2.0 diesel description
Crossover / SUV Hyundai Santa Fe 2018 2.0 CRDi 4WD has been produced from January, 2018 to December, 2020. It has four-cylinder diesel engine with displacement of 2.0 litres, which produces power of 182 horsepower on 4000 rpm and torque 397 Nm (Newton metres) on 1750 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has Common Rail fuel system, it has no turbine. Engine versions compliant with Euro 5 and Euro 6 emission standards available. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 220 000 and 370 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
The diesel engine is highly reliable when properly maintained, offering an excellent balance of power and fuel efficiency. However, it has several important ...
This Hyundai Santa FE 2.0 engine oil type is 5W-30, 5W-40 and oil capacity is 8.8 litres.
Hyundai Santa Fe 2018 2.0 CRDi 4WD has all four wheel drive (AWD, 4x4) and automatic gearbox with 8 gears.
Hyundai Santa Fe 2018 2.0 CRDi 4WD accelerates to speed 100 kilometres per hour in 10 seconds. The maximum speed of this car is 201 km/h.
In combined cycle (city and motorway), the Hyundai Santa Fe 2018 2.0 CRDi 4WD fuel consumption is 8.1 litres per 100km (12.3 km/l) - this is the most fuel efficient Hyundai Santa FE 2018 - 2020 version, city fuel economy - 8.8 l/100km, fuel consumption on highway - 7.2 l/100km. Fuel tank capacity is 71 litres or 18.76 gallons, which gives a mileage up to 860 kilometers without refueling in urban cycle and even up to 980 kilometers on highway.
Hyundai Santa FE safety
During safety testing Hyundai Santa FE has obtained 5 stars from five, which means very high safety level.
Adults (driver and passenger) safety of Hyundai Santa FE is evaluated with outstanding rate 94 from 100, children safety: very good mark - 88 from 100, for pedestrian protection Hyundai Santa FE got 67 points from 100.
Hyundai Santa FE safety equipment has been rated as good - 76 percents from 100.
Hyundai Santa Fe 2018 2.0 CRDi 4WD technical data
| Model: | Hyundai Santa Fe 2.0 CRDi 4WD | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2018. January ... 2020. December | ||
| Engine: | 1995 cm3 Diesel, 4 cylinders | CO2 emissions: | no data |
| Power: | 182 HP ON 4000 RPM | Torque: | 397 NM ON 1750 RPM |
| Gearbox: | Automatic gearbox (8 gears) | Drive type: | All wheel drive (AWD, 4x4) |
| Top speed: | 201 km/h | Acceleration 0-100 km/h: | 10.0 seconds |
| Fuel consumption (l/100km): | 8.1 (combined) 8.8 (urban) 7.2 (highway) | ||
| Fuel tank capacity: | 71 litres (18.8 gallons) | ||
| Car dimensions: | 4.77m (length) 1.89m (width) 1.68m (height) | ||
| Ground clearance: | 185 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 625 litres | ||
Hyundai Santa Fe 2018 2.0 CRDi 4WD engine D4HA
Engine reliability and common problems:
The diesel engine is highly reliable when properly maintained, offering an excellent balance of power and fuel efficiency. However, it has several important characteristics and issues that should be considered.This engine is extremely sensitive to the quality of fuel used. Poor-quality diesel, which often contains many impurities and foreign fractions, inevitably leads to clogging of the fuel pump and injectors, as well as other failures. These conditions also negatively affect the glow plugs, which are frequently impacted by such problems. The engine's fuel delivery system includes many electronic regulators, and a malfunction in any one of them can disrupt the operation of the entire system.
The cost of repairing these engines is high, and their design makes self-repair almost impossible due to the need for specialized equipment. The engine is also demanding regarding the quality of lubricants used. Oil changes must be performed on time, and only high-quality oil should be used. Using low-quality oil can result in the need to replace the turbocharger. A common symptom of this issue is the engine stalling during sudden braking.
Despite these shortcomings, the engine provides excellent durability and reliable performance when timely maintenance is performed, and only high-quality diesel fuel is used.
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 1995 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 84 mm |
| Stroke length (piston move) | 90 mm |
| Compression ratio | 16 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 200,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Common Rail Common rail fuel injection provides more engine power, is quieter, more environmentally friendly and offers better fuel economy, but is more expensive to maintain and repair. |
| Hyundai Santa Fe 2018 2.0 CRDi 4WD oil type | 5W-30, 5W-40 |
| Oil capacity | 8.8 litres (9.3 quarts) More service info |
| Power | 136 - 184 HP ON 4000 RPM |
| Torque | 320 - 400 NM ON 1750 RPM |
| Start of production (year) | 2009 |
| Duration of production | 16 years |
| Engine also used on | Kia Sportage Hyundai Tucson Kia Sorento Hyundai ix35 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Hyundai Santa FE crossover [2018 - 2020] modifications
| Modification | Engine | Power | Consumption | Gearbox | Drive type |
|---|---|---|---|---|---|
|
Hyundai Santa Fe 2018 2.0 T-GDi 4WD
Most powerfull petrol version (235 HP) |
2.0 Petrol | 235 HP | 11.1 l/100km | Automatic (8) | All wheel |
| Hyundai Santa FE 2018 R 2.0 CRDi | 2.0 Diesel | 182 HP | - | Manual (6) | Front wheel |
| Hyundai Santa FE 2018 R 2.0 CRDi 4x4 | 2.0 Diesel | 182 HP | - | Manual (6) | All wheel |
| Hyundai Santa Fe 2018 2.0 CRDi 4WD | 2.0 Diesel | 182 HP | 8.1 l/100km | Automatic (8) | All wheel |
| Hyundai Santa FE 2018 R 2.2 CRDi | 2.2 Diesel | 197 HP | - | Manual (6) | Front wheel |
|
Hyundai Santa FE 2018 R 2.2 CRDi Automatic
Most fuel efficient diesel version by real consumption |
2.2 Diesel | 197 HP | - | Automatic (8) | Front wheel |
| Hyundai Santa FE 2018 R 2.2 CRDi 4x4 | 2.2 Diesel | 197 HP | - | Manual (6) | All wheel |
|
Hyundai Santa Fe 2018 2.2 CRDi 4WD
Most dynamic version - 100 km/h in 9.3 seconds |
2.2 Diesel | 197 HP | 8.1 l/100km | Automatic (8) | All wheel |
| Hyundai Santa Fe 2018 2.4 GDi 4WD | 2.4 Petrol | 185 HP | - | Automatic (6) | All wheel |