Dodge Nitro 2007 2.8 diesel description
Crossover / SUV Dodge Nitro 2007 2.8 CRD 4x2 has been produced from June, 2007 to January, 2010. It has four-cylinder diesel engine with displacement of 2.8 litres, which produces power of 177 horsepower on 3800 rpm and torque 410 Nm (Newton metres) on 2000 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by belt (What is an engine chain and belt? ). Engine has Common Rail fuel system and Garrett GTB1756VK turbine. Engine versions compliant with Euro 4 and Euro 5 emission standards available. Average engine life expectancy (mileage before serious repairs are needed) is from 270 000 to 450 000 kilometres. It is important to remember that engine life is highly dependent on regular maintenance and the quality of the oils and fuels used.
More engine specs
This Dodge Nitro 2.8 engine oil type is 5W-30 and oil capacity is 6.5 litres.
Dodge Nitro 2007 2.8 CRD 4x2 has classical rear wheel drive (RWD) and manual gearbox with 6 gears.
Dodge Nitro 2007 2.8 CRD 4x2 accelerates to speed 100 kilometres per hour in 11.5 seconds. The maximum speed of this car is 180 km/h.
The fuel consumption of this Dodge Nitro 2007 2.8 CRD 4x2 in combined mode (combining urban and highway driving) is 8.6 litres per 100km (11.6 km/l) - this is the most fuel efficient Dodge Nitro 2007 - 2011 version, city fuel economy - 10.8 l/100km, fuel consumption on highway - 7.3 l/100km. Fuel tank capacity is 70 litres or 18.49 gallons, which gives a mileage up to 800 kilometers without refueling in urban cycle and even up to 940 kilometers on highway.
According to user reviews, this Dodge real everyday fuel consumption is 9 litres per 100 km, which is 5% more than the manufacturer's stated. More - Real Dodge Nitro fuel consumption.
- Dodge Nitro 2007 2.8 CRD 4x4 MT
- Dodge Nitro 2007 2.8 CRD 4x4 Automatic AT is more dynamic - it reaches 100 km/h 1 seconds faster (in 10.5 seconds), but less economic with manufacturer's fuel consumption is higher by 0.8 litres per 100 km or 9 % - 9.4 litres per 100 km, whereas users reported real fuel consumption is higher by 1.6 litres per 100 km or 18 % - 10.6 litres per 100 km
Dodge Nitro 2007 2.8 CRD 4x2 technical data
| Model: | Dodge Nitro 2.8 CRD 4x2 | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2007. June ... 2010. January | ||
| Engine: | 2768 cm3 Diesel, 4 cylinders | CO2 emissions: | 228 g/km |
| Power: | 177 HP ON 3800 RPM | Torque: | 410 NM ON 2000 RPM |
| Gearbox: | Manual gearbox (6 gears) | Drive type: | Rear wheel drive (RWD) |
| Maximum speed: | 180 km/h | Acceleration 0-100 km/h: | 11.5 seconds |
| Fuel consumption (l/100km): | 8.6 (combined) 10.8 (urban) 7.3 (highway) | ||
| Real fuel consumption: | 9 l/100km (26.1 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 70 litres (18.5 gallons) | ||
| Car dimensions: | 4.58m (length) 1.86m (width) 1.77m (height) | ||
| Turning diameter: | 11.1 meters | ||
| Ground clearance: | 210 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 369 litres | ||
| Trunk max capacity: | 1994 litres (with rear seats folded down) | ||
| Gross weight: | 2520 kg | ||
Dodge Nitro 2007 2.8 CRD 4x2 engine ENS
Engine reliability:
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2766 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 94 mm |
| Stroke length (piston move) | 100 mm |
| Compression ratio | 17.5 : 1 |
| Camshaft drive | Timing belt Timing belt engines are generally quieter and less vibrating than chain engines, but belt usually needs to be replaced more often and the risk of breakage is higher. |
| Fuel system | Common Rail Common rail fuel injection provides more engine power, is quieter, more environmentally friendly and offers better fuel economy, but is more expensive to maintain and repair. |
| Dodge Nitro 2007 2.8 CRD 4x2 oil type | 5W-30 |
| Oil capacity | 6.5 litres (6.9 quarts) |
| Power | 160 - 200 HP ON 3800 RPM |
| Torque | 360 - 460 NM ON 2000 RPM |
| Engine manufacturer | Jeep |
| Start of production (year) | 2006 |
| Duration of production | 12 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2009 onwards. |
|
| Engine also used on | Chrysler Grand Voyager Jeep Cherokee Jeep Wrangler |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Dodge Nitro crossover [2007 - 2011] modifications
| Modification | Engine | Power | Consumption | Gearbox | Drive type |
|---|---|---|---|---|---|
|
Dodge Nitro 2007 2.8 CRD 4x2
Jun 2007 — Jan 2010 Most fuel efficient diesel version |
2.8 Diesel | 177 HP | 8.6 l/100km | Manual (6) | Rear wheel |
|
Dodge Nitro 2007 2.8 CRD 4x4
Jun 2007 — Jan 2010 Most fuel efficient diesel version |
2.8 Diesel | 177 HP | 8.6 l/100km | Manual (6) | All wheel |
| Dodge Nitro 2007 2.8 CRD 4x4 Automatic Jun 2007 — Jan 2010 | 2.8 Diesel | 177 HP | 9.4 l/100km | Automatic (5) | All wheel |
| Dodge Nitro 2007 3.7 V6 4x4 Jun 2007 — Jan 2010 | 3.7 Petrol | 205 HP | 12.0 l/100km | Automatic (4) | All wheel |
| Dodge Nitro 2007 4.0 i V6 24V | 4.0 Petrol | 258 HP | 12.2 l/100km | Automatic (5) | Rear wheel |
|
Dodge Nitro 2007 4.0 V6 4x4
Jun 2007 — Jan 2010 Most dynamic version - 100 km/h in 8.5 seconds |
4.0 Petrol | 260 HP | 11.3 l/100km | Automatic (5) | All wheel |