CHEVROLET Impala 2013 2.4 Ecotec eAssist
Chevrolet Impala 2013 2.4 petrol description
Sedan CHEVROLET Impala 2013 2.4 Ecotec eAssist has been produced from January, 2013 to December, 2015. It has four-cylinder petrol engine with displacement of 2.4 litres, which produces power of 184 horsepower on 6200 rpm and torque 233 Nm (Newton metres) on 4900 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, this is an atmospheric engine (without turbine). The engine meets the Euro 5 emissions standard. Engine lifespan (mileage before major repairs or overhaul) can last from 270 up to 450 thousand kilometres. It is important to remember that engine life is highly dependent on regular maintenance and the quality of the oils and fuels used.
More engine specs
This Chevrolet Impala 2.4 engine oil type is 5W-30 and oil capacity is 4.7 litres.
CHEVROLET Impala 2013 2.4 Ecotec eAssist has front wheel drive (FWD) and automatic gearbox with 6 gears.
CHEVROLET Impala 2013 2.4 Ecotec eAssist fuel consumption is 8.1 litres per 100km in combined city/highway mode (12.3 km/l) - this is the most fuel efficient Chevrolet Impala 2013 version, city fuel economy - 9.4 l/100km, fuel consumption on highway - 6.7 l/100km. Fuel tank capacity is 60 litres or 15.85 gallons, which gives a mileage up to 740 kilometers without refueling in urban cycle and even up to 880 kilometers on highway.
CHEVROLET Impala 2013 2.4 Ecotec eAssist technical data
| Model: | CHEVROLET Impala 2.4 Ecotec eAssist | ||
|---|---|---|---|
| Body style: | Sedan | ||
| Production period: | 2013. January ... 2015. December | ||
| Engine: | 2383 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 184 HP ON 6200 RPM | Torque: | 233 NM ON 4900 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 8.1 (combined) 9.4 (urban) 6.7 (highway) | ||
| Fuel tank capacity: | 60 litres (15.9 gallons) | ||
| Car dimensions: | 5.11m (length) 1.85m (width) 1.50m (height) | ||
| Turning diameter: | 11.8 meters | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 532 litres | ||
CHEVROLET Impala 2013 2.4 Ecotec eAssist engine LEA
Engine reliability:
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2384 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 88 mm |
| Stroke length (piston move) | 98 mm |
| Compression ratio | 11.2 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| CHEVROLET Impala 2013 2.4 Ecotec eAssist oil type | 5W-30 |
| Oil capacity | 4.7 litres (5 quarts) |
| Coolant capacity | 9.6 litres (10.1 quarts) |
| Power | 174 - 182 HP ON 6200 RPM |
| Torque | 233 NM ON 4900 RPM |
| Engine manufacturer | no data |
| Start of production (year) | 2011 |
| Duration of production | 6 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2014 onwards. |
All Chevrolet Impala sedan [2013 modifications
| Modification | Engine | Power | Consumption |
|---|---|---|---|
|
CHEVROLET Impala 2013 2.4 Ecotec eAssist
Jan 2013 — Dec 2015 Most fuel efficient version |
2.4 Petrol | 184 HP | 8.1 l/100km |
| CHEVROLET Impala 2013 2.5 Ecotec | 2.5 Petrol | 197 HP | 9.4 l/100km |
|
CHEVROLET Impala 2013 3.6 V6
Most powerfull version (309 HP) |
3.6 Petrol | 309 HP | 10.7 l/100km |