BMW X6 2008 40d (E71)
BMW X6 2008 3.0 diesel description
Crossover / SUV BMW X6 2008 40d has been produced from January, 2010 to December, 2012. It has six-cylinder diesel engine with displacement of 3.0 litres, which produces power of 306 horsepower on 4400 rpm and torque 600 Nm (Newton metres) on 1500 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has Common Rail fuel system and BiTurbo turbine. The engine meets the Euro 5 emissions standard. Approximate engine life expectancy (mileage until serious repairs are required) for this engine is between 220 000 and 370 000 kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
This BMW X6 3.0 engine oil type is 5W-30 and oil capacity is 6.5 litres.
BMW X6 2008 40d has all four wheel drive (AWD, 4x4) and automatic gearbox with 8 gears.
BMW X6 2008 40d accelerates to speed 100 kilometres per hour in 6.5 seconds. The maximum speed of this car is 236 km/h.
In combined cycle (city and motorway), the BMW X6 2008 40d fuel consumption is 7.5 litres per 100km (13.3 km/l) - this is one of most fuel efficient BMW X6 2008 - 2012 versions, fuel consumption in city - 8.8 l/100km, highway fuel economy - 6.8 l/100km. Fuel tank capacity is 85 litres or 22.46 gallons, which gives a mileage up to 1120 kilometers without refueling in urban cycle and even up to 1240 kilometers on highway.
According to user reviews, this BMW real everyday fuel consumption is 10.5 litres per 100 km, which is 40% more than the manufacturer's stated. More - Real BMW X6 fuel consumption.
BMW X6 2008 40d technical data
| Model: | BMW X6 40d | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2010. January ... 2012. December | ||
| Engine: | 2993 cm3 Diesel, 6 cylinders | CO2 emissions: | no data |
| Power: | 306 HP ON 4400 RPM | Torque: | 600 NM ON 1500 RPM |
| Gearbox: | Automatic gearbox (8 gears) | Drive type: | All wheel drive (AWD, 4x4) |
| Top speed: | 236 km/h | Acceleration 0-100 km/h: | 6.5 seconds |
| Fuel consumption (l/100km): | 7.5 (combined) 8.8 (urban) 6.8 (highway) | ||
| Real fuel consumption: | 10.5 l/100km (22.4 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 85 litres (22.5 gallons) | ||
| Car dimensions: | 4.88m (length) 1.98m (width) 1.69m (height) | ||
| Turning diameter: | 12.8 meters | ||
| Ground clearance: | 212 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 570 litres | ||
| Trunk max capacity: | 1450 litres (with rear seats folded down) | ||
| Gross weight: | 2710 kg | ||
BMW X6 2008 40d engine N57D30T0
Engine reliability:
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2993 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 84 mm |
| Stroke length (piston move) | 90 mm |
| Compression ratio | 16.5 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 200,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Common Rail Common rail fuel injection provides more engine power, is quieter, more environmentally friendly and offers better fuel economy, but is more expensive to maintain and repair. |
| BMW X6 2008 40d oil type | 5W-30 |
| Oil capacity | 6.5 litres (6.9 quarts) More service info |
| Coolant capacity | 10.4 litres (11 quarts) |
| Power | 299 - 306 HP ON 4400 RPM |
| Torque | 600 NM ON 1500 RPM |
| Start of production (year) | 2008 |
| Duration of production | 17 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2011 onwards. |
|
| Engine also used on | BMW 5 sērija BMW X5 BMW 7 sērija |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
Most often compared to
All BMW X6 crossover [2008 - 2012] modifications
| Modification | Engine | Power | Consumption |
|---|---|---|---|
| BMW X6 2008 3.0 xDrive35i 4x4 Mai 2008 — Jan 2012 | 3.0 Petrol | 306 HP | 10.9 l/100km |
| BMW X6 2008 3.0 xDrive30d 4x4 Mai 2008 — Jan 2010 | 3.0 Diesel | 235 HP | 8.2 l/100km |
|
BMW X6 2010 3.0 xDrive30d 4x4
Jan 2010 — Jan 2012 Most fuel efficient diesel version |
3.0 Diesel | 245 HP | 7.4 l/100km |
| BMW X6 2008 3.0 xDrive35d 4x4 Mai 2008 — Jan 2012 | 3.0 Diesel | 286 HP | 8.3 l/100km |
|
BMW X6 2010 3.0 40d 4x4
Jan 2010 — Dec 2012 Most powerfull diesel version (306 HP) |
3.0 Diesel | 306 HP | 7.5 l/100km |
| BMW X6 2008 4.4 xDrive50i 4x4 Mai 2008 — Jan 2012 | 4.4 Petrol | 408 HP | 12.5 l/100km |
|
BMW X6 2010 4.4 ActiveHybrid 4x4
Jan 2010 — Jan 2012 Most fuel efficient petrol version |
4.4 Petrol | 408 HP | 9.9 l/100km |
|
BMW X6 2009 4.4 M 4x4
Jan 2009 — Jan 2012 Most dynamic version - 100 km/h in 4.7 seconds |
4.4 Petrol | 555 HP | 13.9 l/100km |