BMW X5 2010 xDrive40d (E70)
BMW X5 2010 3.0 diesel description
Crossover / SUV BMW X5 2010 xDrive40d has been produced from January, 2010 to January, 2013. It has six-cylinder diesel engine with displacement of 3.0 litres, which produces power of 306 horsepower on 4400 rpm and torque 600 Nm (Newton metres) on 1500 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has Common Rail fuel system and BiTurbo turbine. The engine meets the Euro 5 emissions standard. Engine lifespan (mileage before major repairs or overhaul) can last from 220 up to 370 thousand kilometres. Remember that engine life depends on regular maintenance and the quality of the materials used (oils, fuels, etc.).
More engine specs
This BMW X5 3.0 engine oil type is 5W-30 and oil capacity is 6.5 litres.
BMW X5 2010 xDrive40d has all four wheel drive (AWD, 4x4) and automatic gearbox with 8 gears.
BMW X5 2010 xDrive40d accelerates to speed 100 kilometres per hour in 6.6 seconds. The maximum speed of this car is 236 km/h.
BMW X5 2010 xDrive40d fuel consumption is 7.5 litres per 100km in combined city/highway mode (13.3 km/l) - this is one of most fuel efficient BMW X5 2010 - 2013 versions, city fuel economy - 8.8 l/100km, fuel consumption on highway - 6.8 l/100km. Fuel tank capacity is 85 litres or 22.46 gallons, which gives a mileage up to 1120 kilometers without refueling in urban cycle and even up to 1240 kilometers on highway.
According to user reviews, this BMW real everyday fuel consumption is 10.5 litres per 100 km, which is 40% more than the manufacturer's stated. More - Real BMW X5 fuel consumption.
BMW X5 2010 xDrive40d technical data
| Model: | BMW X5 xDrive40d | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2010. January ... 2013. January | ||
| Engine: | 2993 cm3 Diesel, 6 cylinders | CO2 emissions: | 198 g/km |
| Power: | 306 HP ON 4400 RPM | Torque: | 600 NM ON 1500 RPM |
| Gearbox: | Automatic gearbox (8 gears) | Drive type: | All wheel drive (AWD, 4x4) |
| Top speed: | 236 km/h | Acceleration 0-100 km/h: | 6.6 seconds |
| Fuel consumption (l/100km): | 7.5 (combined) 8.8 (urban) 6.8 (highway) | ||
| Real fuel consumption: | 10.5 l/100km (22.4 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 85 litres (22.5 gallons) | ||
| Car dimensions: | 4.86m (length) 1.93m (width) 1.78m (height) | ||
| Turning diameter: | 12.8 meters | ||
| Ground clearance: | 222 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 620 litres | ||
| Trunk max capacity: | 1750 litres (with rear seats folded down) | ||
| Gross weight: | 2790 kg | ||
BMW X5 2010 xDrive40d engine N57D30T0
Engine reliability:
Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2993 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 84 mm |
| Stroke length (piston move) | 90 mm |
| Compression ratio | 16.5 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 200,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Common Rail Common rail fuel injection provides more engine power, is quieter, more environmentally friendly and offers better fuel economy, but is more expensive to maintain and repair. |
| BMW X5 2010 xDrive40d oil type | 5W-30 |
| Oil capacity | 6.5 litres (6.9 quarts) More service info |
| Coolant capacity | 10.4 litres (11 quarts) |
| Power | 299 - 306 HP ON 4400 RPM |
| Torque | 600 NM ON 1500 RPM |
| Start of production (year) | 2008 |
| Duration of production | 17 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2011 onwards. |
|
| Engine also used on | BMW 5 sērija BMW 7 sērija BMW X6 |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All BMW X5 crossover [2010 - 2013] modifications
| Modification | Engine | Power | Consumption |
|---|---|---|---|
|
BMW X5 2010 3.0 xDrive35i 4x4
Jan 2010 — Jan 2013 Most fuel efficient petrol version |
3.0 Petrol | 306 HP | 10.1 l/100km |
|
BMW X5 2010 3.0 xDrive30d 4x4
Jan 2010 — Jan 2013 Most fuel efficient diesel version |
3.0 Diesel | 245 HP | 7.4 l/100km |
| BMW X5 2010 3.0 xDrive40d 4x4 Jan 2010 — Jan 2013 | 3.0 Diesel | 306 HP | 7.5 l/100km |
|
BMW X5 2013 3.0 M50d 4x4
Jan 2013 — Dec 2013 Most dynamic version - 100 km/h in 5.4 seconds |
3.0 Diesel | 381 HP | 7.5 l/100km |
|
BMW X5 2010 4.4 xDrive50i 4x4
Jan 2010 — Jan 2013 Most powerfull petrol version (408 HP) |
4.4 Petrol | 408 HP | 12.5 l/100km |