BMW 6 series 2007 3.0 petrol description
Cabrio BMW 630i Cabrio has been produced from September, 2007 to January, 2011. It has six-cylinder petrol engine with displacement of 3.0 litres, which produces power of 272 horsepower on 6700 rpm and torque 320 Nm (Newton metres) on 2750 revolutions per minute.
This 6-cylinder 24-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system without turbocharger. The engine meets the Euro 5 emissions standard. Average engine life expectancy (mileage before serious repairs are needed) is from 220 000 to 370 000 kilometres. It is important to remember that engine life is highly dependent on regular maintenance and the quality of the oils and fuels used.
More engine specs
Relatively reliable engine. Most of the problems are related to the fuel injection system, ...
This BMW 6 series 3.0 engine oil type is 5W-30 and oil capacity is 6.5 litres.
BMW 630i Cabrio has classical rear wheel drive (RWD) and automatic gearbox with 6 gears.
BMW 630i Cabrio accelerates to speed 100 kilometres per hour in 7.2 seconds. The maximum speed of this car is 250 km/h.
The fuel consumption of this BMW 630i Cabrio in combined mode (combining urban and highway driving) is 9.9 litres per 100km (10.1 km/l), city fuel economy - 14.2 l/100km, fuel consumption on highway - 7.5 l/100km. Fuel tank capacity is 70 litres or 18.49 gallons, which gives a mileage up to 700 kilometers without refueling in urban cycle and even up to 920 kilometers on highway.
BMW 630i Cabrio technical data
| Model: | BMW 630i Cabrio | ||
|---|---|---|---|
| Body style: | Cabrio | ||
| Production period: | 2007. September ... 2011. January | ||
| Engine: | 2996 cm3 Petrol, 6 cylinders | CO2 emissions: | 238 g/km |
| Power: | 272 HP ON 6700 RPM | Torque: | 320 NM ON 2750 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Rear wheel drive (RWD) |
| Maximum speed: | 250 km/h | Acceleration 0-100 km/h: | 7.2 seconds |
| Fuel consumption (l/100km): | 9.9 (combined) 14.2 (urban) 7.5 (highway) | ||
| Fuel tank capacity: | 70 litres (18.5 gallons) | ||
| Car dimensions: | 4.82m (length) 1.86m (width) 1.37m (height) | ||
| Turning diameter: | 11.4 meters | ||
| Trunk capacity: | 300 litres | ||
| Trunk max capacity: | 350 litres (with rear seats folded down) | ||
| Gross weight: | 2120 kg | ||
BMW 630i Cabrio engine N53B30 OL
Engine reliability and common problems:
Relatively reliable engine. Most of the problems are related to the fuel injection system, spark plugs and coils, and the Vanos phase control system. Problems with the high-pressure fuel pump were common in early model years. In all other respects, the engine is considered to be of fair quality and reliability.Overall, this engine can last around 220,000 to 370,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2996 cm3 |
|---|---|
| Number of cylinders | 6 |
| Bore (cylinder diameter) | 85 mm |
| Stroke length (piston move) | 88 mm |
| Compression ratio | 12 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 120,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Injection |
| BMW 630i Cabrio oil type | 5W-30 |
| Oil capacity | 6.5 litres (6.9 quarts) More service info |
| Coolant capacity | 10.5 litres (11.1 quarts) |
| Power | 258 - 272 HP ON 6700 RPM |
| Torque | 310 - 320 NM ON 2750 RPM |
| Start of production (year) | 2006 |
| Duration of production | 7 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2009 onwards. |
|
| Engine also used on | BMW 5 sērija BMW 3 sērija |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All BMW 6 series cabrio [2007 - 2011] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
BMW 630i Cabrio
Most fuel efficient petrol version |
3.0 Petrol | 272 HP | 9.6 l/100km | Manual (6) |
| BMW 630i Cabrio | 3.0 Petrol | 272 HP | 9.9 l/100km | Automatic (6) |
| BMW 635d Cabrio | 3.0 Diesel | 286 HP | 7.2 l/100km | Automatic (6) |
|
BMW 650i Cabrio
Most dynamic version - 100 km/h in 5.7 seconds |
4.8 Petrol | 367 HP | 12.9 l/100km | Manual (6) |
|
BMW 650i Cabrio
Most powerfull petrol version (367 HP) |
4.8 Petrol | 367 HP | 11.7 l/100km | Automatic (6) |