BMW 320i (Touring F31)

BMW 3 series 2015 2.0 petrol description

Estate car / wagon BMW 320i has been produced from January, 2015 to January, 2018. It has four-cylinder petrol engine with displacement of 2.0 litres, which produces power of 184 horsepower on 5000 rpm and torque 290 Nm (Newton metres) on 1350 revolutions per minute.

This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system and MHI TD04LR6W turbine. The engine meets the Euro 6 emissions standard. Engine lifespan (mileage before major repairs or overhaul) can last from 200 up to 340 thousand kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs 
Compared to their predecessors, B48 engines are more robust and less prone to major failures. They are well-suited for chip tuning, which can noticeably enhance  ...  This BMW 3 series 2.0 engine oil type is 0W-30, 5W-30, 0W-20 and oil capacity is 5.3 litres.

BMW 320i has classical rear wheel drive (RWD) and automatic gearbox with 8 gears.
BMW 320i accelerates to speed 100 kilometres per hour in 7.5 seconds. The maximum speed of this car is 228 km/h.

BMW 320i fuel consumption is 5.5 litres per 100km in combined city/highway mode (18.2 km/l) - this is one of most fuel efficient BMW 3 sērija 2015 - 2018 versions, city fuel economy - 7.3 l/100km, fuel consumption on highway - 4.5 l/100km. Fuel tank capacity is 60 litres or 15.85 gallons, which gives a mileage up to 1080 kilometers without refueling in urban cycle and even up to 1320 kilometers on highway.
According to user reviews, this BMW real everyday fuel consumption is 8 litres per 100 km, which is 45% more than the manufacturer's stated. More - Real BMW 3 series fuel consumption.

With the same engine there are also three other BMW 3 series versions - with manual gearbox (BMW 320i MT), and with four wheel (4x4) drive and manual gearbox (BMW 320i xDrive MT 4x4), and with four wheel (4x4) drive and automatic gearbox (BMW 320i xDrive AT 4x4) available:
  • BMW 320i MT manufacturer's fuel consumption is higher by 0.4 litres per 100 km or 7 % - 5.9 litres per 100 km, whereas users reported real fuel consumption is lower by 0.3 litres per 100 km or 4 % - 7.7 litres per 100 km
  • BMW 320i xDrive MT 4x4 manufacturer's fuel consumption is higher by 1.3 litres per 100 km or 24 % - 6.8 litres per 100 km, whereas users reported real fuel consumption is higher by 0.9 litres per 100 km or 11 % - 8.9 litres per 100 km
  • BMW 320i xDrive AT 4x4 is more sluggish, reaching 100 km/h 0.4 seconds later (in 7.9 seconds), but manufacturer's fuel consumption is higher by 0.6 litres per 100 km or 11 % - 6.1 litres per 100 km, whereas users reported real fuel consumption is similar - 8.0 litres per 100 km
BMW 3 series 2.0 service information and maintenance intervals Oil change intervals, capacities and specifications, service information for filters, spark plugs, belts etc.
BMW 3 series 2015

BMW 320i technical data

Model: BMW 320i
Body style: Estate car / wagon
Production period: 2015. January ... 2018. January 
Engine: 1998 cm3 Petrol, 4 cylinders CO2 emissions: 129 g/km
Power: 184 HP ON 5000 RPM Torque: 290 NM ON 1350 RPM
Gearbox: Automatic gearbox (8 gears) Drive type: Rear wheel drive (RWD)
Top speed: 228 km/h Acceleration 0-100 km/h: 7.5 seconds
Fuel consumption (l/100km): 5.5 (combined) 7.3 (urban) 4.5 (highway)
Real fuel consumption: 8 l/100km (29.4 MPG) by user reviews from various sources
Fuel tank capacity: 60 litres (15.9 gallons)
Car dimensions: 4.63m (length) 1.81m (width) 1.43m (height)
Turning diameter: 11.3 meters
Trunk capacity: 495 litres
Gross weight: 2115 kg

BMW 320i engine B48B20M0

Engine reliability and common problems:

Compared to their predecessors, B48 engines are more robust and less prone to major failures. They are well-suited for chip tuning, which can noticeably enhance performance and responsiveness without compromising reliability.

Oil consumption, while significantly improved over earlier engines, may still appear closer to 100,000 km, often due to hardened valve stem seals. Another common issue is unstable idle or fault codes related to a lean mixture, typically caused by a faulty fuel tank ventilation valve — a relatively inexpensive part.

The cooling system is a known weak point. Coolant leaks may result from seal failures, cracks, thermostat or pump malfunctions, or general contamination. Symptoms include engine overheating, white smoke from the exhaust, poor coolant quality, visible leaks, warnings on the dashboard, and elevated temperature readings.

These engines are sensitive to fuel quality and oil change intervals. Cutting corners on maintenance often leads to costly repairs or even engine replacement.

At higher mileage, weaknesses may also include chain tensioners, the VANOS and Valvetronic systems, high-pressure fuel pumps, throttle actuators, and the turbocharger.

Overall, the B48 is a reliable and practical engine without inherent flaws. The mentioned issues tend to appear only under certain conditions and are not universal across all units.
Overall, this engine can last around 200,000 to 340,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.
The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
Engine displacement 1998 cm3
Number of cylinders 4
Bore (cylinder diameter) 82 mm
Stroke length (piston move) 94.6 mm
Compression ratio 11 : 1
Camshaft drive Timing chain

Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more.

More service info
Fuel system Injection
BMW 320i oil type 0W-30, 5W-30, 0W-20
Oil capacity 5.3 litres (5.6 quarts) More service info
Power 184 HP ON 5000 RPM
Torque 290 NM ON 1350 RPM
Start of production (year) 2014
Duration of production 11 years

Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2017 onwards.

Engine also used on BMW 5 sērija BMW 1 sērija BMW X3 BMW 4 sērija and 3 other models

Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design.

All BMW 3 series estate car [2015 - 2018] modifications

Modification Engine Power Consumption Gearbox Drive type
BMW 318i

Most fuel efficient version by real consumption

1.5 Petrol 136 HP 5.4 l/100km Manual (6) Rear wheel
BMW 318i

Most fuel efficient version

1.5 Petrol 136 HP 5.3 l/100km Automatic (8) Rear wheel
BMW 320i 2.0 Petrol 184 HP 5.9 l/100km Manual (6) Rear wheel
BMW 320i 2.0 Petrol 184 HP 5.5 l/100km Automatic (8) Rear wheel
BMW 320i xDrive 4x4 2.0 Petrol 184 HP 6.8 l/100km Manual (6) All wheel
BMW 320i xDrive 4x4 2.0 Petrol 184 HP 6.1 l/100km Automatic (8) All wheel
BMW 330i 2.0 Petrol 252 HP 6.4 l/100km Manual (6) Rear wheel
BMW 330i

Most dynamic version - 100 km/h in 5.9 seconds

2.0 Petrol 252 HP 5.8 l/100km Automatic (8) Rear wheel
BMW 330i xDrive 4x4 2.0 Petrol 252 HP 6.2 l/100km Automatic (8) All wheel
BMW 3 series 2015 reviews
Alfa Romeo Audi BMW Chevrolet Chrysler Citroen Cupra Dacia Dodge Fiat Ford Honda Hyundai Infiniti Isuzu Jaguar Jeep Kia Lada (VAZ) Land Rover Lexus Mazda Mercedes Mini Mitsubishi Moskvich Nissan Opel Peugeot Porsche Renault Rover SAAB Seat Skoda Smart Subaru Suzuki Toyota Volkswagen Volvo
Contact us: info@auto-abc.lv