Toyota Sienna 2010 2.7 petrol description
Minivan / MPV Toyota Sienna 2010 2.7i has been produced from January, 2010 to December, 2017. It has four-cylinder petrol engine with displacement of 2.7 litres, which produces power of 187 horsepower on 5800 rpm and torque 252 Nm (Newton metres) on 4100 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system without turbocharger. Engine versions compliant with Euro 3 and Euro 4 emission standards available. Average engine life expectancy (mileage before serious repairs are needed) is from 270 000 to 450 000 kilometres. Note that engine life can be longer or shorter depending on maintenance.
More engine specs
This Toyota Sienna 2.7 engine oil type is 5W-30 and oil capacity is 4.4 litres.
Toyota Sienna 2010 2.7i has front wheel drive (FWD) and automatic gearbox with 6 gears.
The fuel consumption of this Toyota Sienna 2010 2.7i in combined mode (combining urban and highway driving) is 11.2 litres per 100km (8.9 km/l) - this is the most fuel efficient Toyota Sienna 2010 - 2017 version, city fuel economy - 12.4 l/100km, fuel consumption on highway - 9.8 l/100km. Fuel tank capacity is 75 litres or 19.82 gallons, which gives a mileage up to 660 kilometers without refueling in urban cycle and even up to 760 kilometers on highway.
Toyota Sienna 2010 2.7i technical data
| Model: | Toyota Sienna 2.7i | ||
|---|---|---|---|
| Body style: | Minivan / MPV | ||
| Production period: | 2010. January ... 2017. December | ||
| Engine: | 2700 cm3 Petrol, 4 cylinders | CO2 emissions: | no data |
| Power: | 187 HP ON 5800 RPM | Torque: | 252 NM ON 4100 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Maximum speed: | no data | Acceleration 0-100 km/h: | no data |
| Fuel consumption (l/100km): | 11.2 (combined) 12.4 (urban) 9.8 (highway) | ||
| Fuel tank capacity: | 75 litres (19.8 gallons) | ||
| Car dimensions: | 5.09m (length) 1.99m (width) 1.75m (height) | ||
| Turning diameter: | 11.4 meters | ||
| Ground clearance: | 170 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 993 litres | ||
| Trunk max capacity: | 3810 litres (with rear seats folded down) | ||
Toyota Sienna 2010 2.7i engine 1AR-FE
Engine reliability:
Overall, this engine can last around 270,000 to 450,000 km if properly maintained, using the correct quality oil and fuel, and carrying out regular checks and maintenance.The engine has hydraulic valve tappets (lifters), which provide quieter operation and do not require periodic adjustment, but are more complex in design and can cause serious engine damage in the event of failure.
| Engine displacement | 2672 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 90 mm |
| Stroke length (piston move) | 105 mm |
| Compression ratio | 10 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. |
| Fuel system | Injection |
| Toyota Sienna 2010 2.7i oil type | 5W-30 |
| Oil capacity | 4.4 litres (4.7 quarts) |
| Power | 180 - 190 HP ON 5800 RPM |
| Torque | 245 - 255 NM ON 4100 RPM |
| Start of production (year) | 2008 |
| Duration of production | 16 years |
Often in the first years of production, engines tend to have various constructive problems, so it is recommended to choose a car with this engine from 2011 onwards. |
|
| Engine also used on | Lexus RX Toyota Highlander |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Toyota Sienna minivan [2010 - 2017] modifications
| Modification | Engine | Power | Consumption |
|---|---|---|---|
|
Toyota Sienna 2010 2.7i
Most fuel efficient version |
2.7 Petrol | 187 HP | 11.2 l/100km |
|
Toyota Sienna 2010 3.5i V6
Most powerfull version (266 HP) |
3.5 Petrol | 266 HP | 13.1 l/100km |