Peugeot 2008 2013 1.6 e-HDi
Peugeot 2008 2013 1.6 diesel description
Crossover / SUV Peugeot 2008 2013 1.6 e-HDi has been produced from January, 2013 to January, 2016. It has four-cylinder diesel engine with displacement of 1.6 litres, which produces power of 92 horsepower on 4000 rpm and torque 230 Nm (Newton metres) on 1750 revolutions per minute.
This 4-cylinder 8-valve engine camshaft is driven by belt (What is an engine chain and belt? ). Engine has Common Rail fuel system without turbocharger. Engine versions compliant with Euro 4 and Euro 5 emission standards available.
More engine specs
This Peugeot 2008 1.6 engine oil type is 5W-30, 5W-40 and oil capacity is 4.3 litres.
Peugeot 2008 2013 1.6 e-HDi has front wheel drive (FWD) and automatic gearbox with 6 gears.
Peugeot 2008 2013 1.6 e-HDi accelerates to speed 100 kilometres per hour in 13.3 seconds. The maximum speed of this car is 180 km/h.
The fuel consumption of this Peugeot 2008 2013 1.6 e-HDi in combined mode (combining urban and highway driving) is 3.8 litres per 100km (26.3 km/l) - this is the most fuel efficient Peugeot 2008 2013 - 2016 version, city fuel economy - 4.1 l/100km, fuel consumption on highway - 3.6 l/100km. Fuel tank capacity is 50 litres or 13.21 gallons, which gives a mileage up to 1300 kilometers without refueling in urban cycle and even up to 1380 kilometers on highway.
According to user reviews, this Peugeot real everyday fuel consumption is 5.3 litres per 100 km, which is 39% more than the manufacturer's stated. More - Real Peugeot 2008 fuel consumption.
Peugeot 2008 safety
During safety testing Peugeot 2008 has obtained 4 stars from five, which means good safety level.
Adults (driver and passenger) safety of Peugeot 2008 is evaluated with outstanding rate 91 from 100, children safety: very good mark - 84 from 100, for pedestrian protection Peugeot 2008 got 62 points from 100.
Peugeot 2008 safety equipment has been rated as average - 68 percents from 100.
Peugeot 2008 2013 1.6 e-HDi technical data
| Model: | Peugeot 2008 1.6 e-HDi | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2013. January ... 2016. January | ||
| Engine: | 1560 cm3 Diesel, 4 cylinders | CO2 emissions: | 98 g/km |
| Power: | 92 HP ON 4000 RPM | Torque: | 230 NM ON 1750 RPM |
| Gearbox: | Automatic gearbox (6 gears) | Drive type: | Front wheel drive (FWD) |
| Maximum speed: | 180 km/h | Acceleration 0-100 km/h: | 13.3 seconds |
| Fuel consumption (l/100km): | 3.8 (combined) 4.1 (urban) 3.6 (highway) | ||
| Real fuel consumption: | 5.3 l/100km (44.4 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 50 litres (13.2 gallons) | ||
| Car dimensions: | 4.16m (length) 1.74m (width) 1.56m (height) | ||
| Turning diameter: | 10.4 meters | ||
| Ground clearance: | 165 mm (approximate, with standard suspension, unladen vehicle) | ||
| Seats: | 5 seats | ||
| Trunk capacity: | 350 litres | ||
| Trunk max capacity: | 1194 litres (with rear seats folded down) | ||
| Gross weight: | 1692 kg | ||
Peugeot 2008 2013 1.6 e-HDi engine DV6DTED
| Engine displacement | 1560 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 75 mm |
| Stroke length (piston move) | 88.3 mm |
| Compression ratio | 16 : 1 |
| Camshaft drive | Timing belt Timing belt engines are generally quieter and less vibrating than chain engines, but belt usually needs to be replaced more often and the risk of breakage is higher. However, the timing belt change interval for a particular engine is long enough to be comparable to the life of some engine chains. More service info |
| Timing belt change interval | 240,000 km (specified), 180,000 km (recommended) |
| Fuel system | Common Rail Common rail fuel injection provides more engine power, is quieter, more environmentally friendly and offers better fuel economy, but is more expensive to maintain and repair. |
| Peugeot 2008 2013 1.6 e-HDi oil type | 5W-30, 5W-40 |
| Oil capacity | 4.3 litres (4.5 quarts) More service info |
| Power | 92 HP ON 4000 RPM |
| Torque | 230 NM ON 1750 RPM |
| Start of production (year) | 2009 |
| Duration of production | 7 years |
| Engine also used on | Peugeot 308 Citroen C3 Citroen C4 Picasso Citroen C4 and 5 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
Most often compared to
All Peugeot 2008 crossover [2013 - 2016] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Peugeot 2008 1.2
Most fuel efficient petrol version by real consumption |
1.2 Petrol | 82 HP | 4.9 l/100km | Manual (5) |
| Peugeot 2008 2013 1.2 e-VTi Jan 2013 — Dec 2015 | 1.2 Petrol | 82 HP | 4.8 l/100km | Automatic (5) |
|
Peugeot 2008 2013 1.2 e-HTP
Jan 2013 — Dec 2015 Most fuel efficient petrol version |
1.2 Petrol | 110 HP | 4.7 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 VTi
Jan 2013 — Dec 2015 Most dynamic version - 100 km/h in 9.5 seconds |
1.6 Petrol | 120 HP | 5.9 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 VTi
Most powerfull petrol version (120 HP) |
1.6 Petrol | 120 HP | 6.5 l/100km | Automatic (4) |
|
Peugeot 2008 2013 1.6 e-HDi
Most fuel efficient diesel version by real consumption |
1.6 Diesel | 92 HP | 4.0 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 e-HDi
Most fuel efficient diesel version |
1.6 Diesel | 92 HP | 3.8 l/100km | Automatic (6) |
|
Peugeot 2008 2013 1.6 e-HDi
Most powerfull diesel version (115 HP) |
1.6 Diesel | 115 HP | 4.0 l/100km | Automatic |