Peugeot 2008 2013 1.6 VTi
Peugeot 2008 2013 1.6 petrol description
Crossover / SUV Peugeot 2008 2013 1.6 VTi has been produced from January, 2013 to January, 2016. It has four-cylinder petrol engine with displacement of 1.6 litres, which produces power of 120 horsepower on 6000 rpm - this is the most powerfull Peugeot 2008 2013 - 2016 version and torque 160 Nm (Newton metres) on 4250 revolutions per minute.
This 4-cylinder 16-valve engine camshaft is driven by chain (What is an engine chain and belt? ). Engine has fuel injection system, it has no turbine. The engine meets the Euro 5 emissions standard.
More engine specs
This Peugeot 2008 1.6 engine oil type is 5W-30, 5W-40 and oil capacity is 4.6 litres.
Peugeot 2008 2013 1.6 VTi has front wheel drive (FWD) and automatic gearbox with 4 gears.
Peugeot 2008 2013 1.6 VTi accelerates to speed 100 kilometres per hour in 11.2 seconds. The maximum speed of this car is 189 km/h.
In combined cycle (city and motorway), the Peugeot 2008 2013 1.6 VTi fuel consumption is 6.5 litres per 100km (15.4 km/l), fuel consumption in city - 8.8 l/100km, highway fuel economy - 5.2 l/100km. Fuel tank capacity is 50 litres or 13.21 gallons, which gives a mileage up to 760 kilometers without refueling in urban cycle and even up to 960 kilometers on highway.
According to user reviews, this Peugeot real everyday fuel consumption is 8.8 litres per 100 km, which is 35% more than the manufacturer's stated. More - Real Peugeot 2008 fuel consumption.
Peugeot 2008 safety
During safety testing Peugeot 2008 has obtained 4 stars from five, which means good safety level.
Adults (driver and passenger) safety of Peugeot 2008 is evaluated with outstanding rate 91 from 100, children safety: very good mark - 84 from 100, for pedestrian protection Peugeot 2008 got 62 points from 100.
Peugeot 2008 safety equipment has been rated as average - 68 percents from 100.
Peugeot 2008 2013 1.6 VTi technical data
| Model: | Peugeot 2008 1.6 VTi | ||
|---|---|---|---|
| Body style: | Crossover / SUV | ||
| Production period: | 2013. January ... 2016. January | ||
| Engine: | 1598 cm3 Petrol, 4 cylinders | CO2 emissions: | 135 g/km |
| Power: | 120 HP ON 6000 RPM | Torque: | 160 NM ON 4250 RPM |
| Gearbox: | Automatic gearbox (4 gears) | Drive type: | Front wheel drive (FWD) |
| Top speed: | 189 km/h | Acceleration 0-100 km/h: | 11.2 seconds |
| Fuel consumption (l/100km): | 6.5 (combined) 8.8 (urban) 5.2 (highway) | ||
| Real fuel consumption: | 8.8 l/100km (26.7 MPG) by user reviews from various sources | ||
| Fuel tank capacity: | 50 litres (13.2 gallons) | ||
| Car dimensions: | 4.16m (length) 1.83m (width) 1.56m (height) | ||
| Turning diameter: | 10.4 meters | ||
| Ground clearance: | 165 mm (approximate, with standard suspension, unladen vehicle) | ||
| Trunk capacity: | 360 litres | ||
| Gross weight: | 1666 kg | ||
Peugeot 2008 2013 1.6 VTi engine EP6C 5FS/5FL
| Engine displacement | 1598 cm3 |
|---|---|
| Number of cylinders | 4 |
| Bore (cylinder diameter) | 77 mm |
| Stroke length (piston move) | 85.8 mm |
| Compression ratio | 11 : 1 |
| Camshaft drive | Timing chain Chain motors are considered more reliable, chain replacement usually is required less often than a timing belt, but they are often louder and vibrate more. More service info |
| Timing chain change interval | 100,000 km (recommended) Sometimes manufacturers do not specify timing chain replacement intervals and design chains for engine life. However, once the recommended change interval has been reached, it is recommended to periodically check the condition of the chain and to change the chain if excessive stretching is detected or if unusual noises from the engine or other symptoms occur. |
| Fuel system | Injection |
| Peugeot 2008 2013 1.6 VTi oil type | 5W-30, 5W-40 |
| Oil capacity | 4.6 litres (4.9 quarts) More service info |
| Power | 120 HP ON 6000 RPM |
| Torque | 160 NM ON 4250 RPM |
| Start of production (year) | 2009 |
| Duration of production | 9 years |
| Engine also used on | Citroen C5 Citroen C4 Picasso Peugeot 3008 Citroen C4 and 6 other models |
Generally, the use of an engine in several models and its long production run is an indication of the quality of the engine and the success of its design. |
All Peugeot 2008 crossover [2013 - 2016] modifications
| Modification | Engine | Power | Consumption | Gearbox |
|---|---|---|---|---|
|
Peugeot 2008 1.2
Most fuel efficient petrol version by real consumption |
1.2 Petrol | 82 HP | 4.9 l/100km | Manual (5) |
| Peugeot 2008 2013 1.2 e-VTi Jan 2013 — Dec 2015 | 1.2 Petrol | 82 HP | 4.8 l/100km | Automatic (5) |
|
Peugeot 2008 2013 1.2 e-HTP
Jan 2013 — Dec 2015 Most fuel efficient petrol version |
1.2 Petrol | 110 HP | 4.7 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 VTi
Jan 2013 — Dec 2015 Most dynamic version - 100 km/h in 9.5 seconds |
1.6 Petrol | 120 HP | 5.9 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 VTi
Most powerfull petrol version (120 HP) |
1.6 Petrol | 120 HP | 6.5 l/100km | Automatic (4) |
|
Peugeot 2008 2013 1.6 e-HDi
Most fuel efficient diesel version by real consumption |
1.6 Diesel | 92 HP | 4.0 l/100km | Manual (5) |
|
Peugeot 2008 2013 1.6 e-HDi
Most fuel efficient diesel version |
1.6 Diesel | 92 HP | 3.8 l/100km | Automatic (6) |
|
Peugeot 2008 2013 1.6 e-HDi
Most powerfull diesel version (115 HP) |
1.6 Diesel | 115 HP | 4.0 l/100km | Automatic |